FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/47 Set contents Ø h8 mm Quantity of drills piece Increasing mm 1076 Order No. € 1–10 19 0.5 115.50 …0001 1–10.5 24 0.5 + K.B.* 172.50 …0003 1–13 25 0.5 247.50 …0005 ​ (W100) nitrated Spiral drill set, with cylindrical shank * With intermediate sizes for tapped holes: 1 piece each.∅ 3.3; 4.2; 6.8; 10.2 mm. nitrated Design: With precision ground point. Application: Extra special drill with extremely high heat resistance and stable core. Suitable for special alloys such as Hastelloy®, Inconel® and Nimonic®. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – 16 18 14 – – – 10 – – – – – – – 1013 25 22 20 20 15 18 – – 11 – – – – – – – 1016 – – 16 18 14 – – – 10 – – – – – – – 1014 ∅ h8 mm Spiral length mm Total length mm TITANIUM > 850 N/mm2 f mm/rev PU 1013 1016 1014 Order No. € € € 1 12 34 0.008 10 2.06 3.73 6.00 …0100 1.1 14 36 0.025 10 1.90 3.38 6.20 …0110 1.2 16 38 0.025 10 1.90 3.38 6.55 …0120 1.3 16 38 0.025 10 1.90 3.38 6.30 …0130 1.4 18 40 0.025 10 1.90 3.38 6.00 …0140 1.5 18 40 0.025 10 1.78 3.21 5.60 …0150 1.6 20 43 0.025 10 1.90 3.38 6.00 …0160 1.7 20 43 0.025 10 1.90 3.38 6.20 …0170 1.8 22 46 0.025 10 1.90 3.38 6.00 …0180 1.9 22 46 0.025 10 1.90 3.38 6.20 …0190 2 24 49 0.025 10 1.78 3.21 4.89 …0200 2.1 24 49 0.032 10 1.78 3.21 6.45 …0210 2.2 27 53 0.032 10 1.78 3.21 6.45 …0220 2.3 27 53 0.032 10 1.78 3.21 6.45 …0230 2.4 30 57 0.032 10 1.90 3.38 6.45 …0240 2.5 30 57 0.032 10 1.92 3.43 5.30 …0250 2.6 30 57 0.04 10 2.02 3.66 6.55 …0260 2.7 33 61 0.04 10 2.16 3.87 6.55 …0270 2.8 33 61 0.04 10 2.16 3.87 6.85 …0280 2.9 33 61 0.04 10 2.23 3.96 6.85 …0290 ​ (W100) (W100) (W107) bright TiN bright Spiral drill, with cylindrical shank Continued on next page 1014 bright 1016 TiN 1013 bright 1013 bright Note: Available as a set (Order No. 1030 on Ç 1/49). ​ 1014 bright Note: Available as a set (Order No. 1014 on Ç 1/49). HSS Co5 ​ DIN 338 ​ Ti ​ 130° ​ 35° ​ ​ ​ ​ ​ ​ Drills HSS/HSS-E 1.1

RkJQdWJsaXNoZXIy NTg4MTI=