Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/153 Design: Application hardened. Suitable for bolt strength corresponding to 8.8. Application: Just for level, closed ring surface. Note: Not allowed for slots. Size Maximum bolt strength kN Hole ∅ D2 mm Outer ∅ D4 mm Height H3 mm 3911 Order No. € M8 17 9.6 17 3.5 0.48 …0110 M10 26 12 21 4.2 0.71 …0120 M12 38 14.2 24 5 0.77 …0130 M14 53 16.5 28 5.6 1.41 …0140 M16 73 19 30 6.2 1.48 …0150 M20 117 23.2 36 7.5 2.35 …0160 M24 168 28 44 9.5 3.88 …0170 (W342) Conical seat DIN 6319 D Design: Steel, tempered to 350 + 80 HV30. Application: Especially suitable for clamping over the slot at clamping arms and slots. For metric bolts Hole ∅ D2 mm Outer ∅ D4 mm Height H3 mm 3912 Order No. € M8 9.6 24 5 1.14 …0110 M10 12 30 5 1.14 …0120 M12 14.2 36 6 1.48 …0130 M14 16.5 40 6 2.26 …0140 M16 19 44 7 2.26 …0150 M20 23.2 50 8 3.09 …0160 M24 28 60 10 5.40 …0170 (W342) Conical seat DIN 6319 G Design: Clamping claw made of steel, forged, tempered and galvanised. Scope of delivery: Clamping claws with bolt for T-slots DIN 787, hexagon nut DIN 6330-B and washer DIN 6340. Slot width mm b1 mm T-slot bolt Clamping height mm d x l mm 3931 3391 Order No. € € 12 17 M12 x 12 x 125 0–50 50 x 140 – 49.70 …0012 12 17 M12 x 12 x 125 0–50 50 x 140 42.10 – …5012 14 17 M12 x 14 x 125 0–50 50 x 140 – 50.60 …0014 14 – M12 x 14 x 125 0–60 42 x 105 42.80 – …5014 16 17 M16 x 16 x 160 0–75 50 x 140 – 54.40 …0016 16 17 M16 x 16 x 160 0–75 50 x 140 46.20 – …5016 18 17 M16 x 18 x 160 0–75 50 x 140 – 54.40 …0018 18 – M16 x 18 x 130 0–80 50 x 130 46.20 – …5018 (W340) (W342) Clamping claw, steplessly adjustable 3391 3391 3931 3931 l Clamping elements 3.8
RkJQdWJsaXNoZXIy NTg4MTI=