Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/143 Design: Made of construction steel, with hardened and coated clamping bolt. The mounting flange diameter is concentric to the clamping diameter so that high repeat accuracy of the parts is achieved. Application: Almost every workpiece (e.g. rotary part, milled part, drilled parts etc.) has at least one hole, and this is what is used by the XPA clamping mandrel for clamping. Clamping is therefore executed from inside and enables machining of the 2nd side without any problems. The compact dimensions allow multi-face machining without disturbing edges for the tool. The clamping mandrel can be machined and can be adapted to the respective diameters by turning and milling. Can be automated using hydraulic and pneumatic equipment. Scope of delivery: Clamping mandrel with 3 fastening screws. Clamping range D1 mm ∅ D h9 mm Dimension D3 Dimension D4 mm Dimension H mm Dimension H1 mm Dimension H2 mm Dimension H3 mm Dimension H4 mm Clamping force kN 3917 Order No. € 4.1– 7.4 20 M2 M2 10.7 7.6 6.1 4.1 3 1.1 85.00 …0380 7.2– 12.4 29.72 M4 M3 21.8 16 15 8 5.9 4.2 68.80 …0390 12.2– 14.2 31.5 M6 M3 24.9 19 15 12 5.9 8.5 81.20 …0400 13.5– 20 37.5 M8 M3 24.9 19 15 14 5.9 11.1 85.80 …0410 18 – 27 50 M10 M4 28.6 22.2 17.5 17 6.4 20 110.00 …0420 23 – 35.3 56 M12 M4 31.8 25.4 20.6 21 6.4 26.3 137.00 …0430 29.3– 42 69.5 M16 M5 39.6 31.8 27 22 7.9 44.5 176.00 …0440 29.3– 51.5 75.5 M16 M5 39.6 31.8 27 22 7.9 44.5 180.00 …0450 29.3– 77.7 107.5 M16 M6 45.5 37.6 32.3 20 7.9 44.5 313.00 …0460 29.3–103 132.9 M16 M6 45.5 37.6 32.3 20 7.9 44.5 411.00 …0470 (W343) Clamping mandrel, XPA Clamping elements 3.8
RkJQdWJsaXNoZXIy NTg4MTI=