FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/137 Design: Made of special cast iron, the clamping surface is precision milled and the guides are ground. Flatness accuracy is 0.03 mm, lead accuracy over 100 mm is 0.01 mm. The dove tail guides are adjustable by guide rails. Whirled trapezoidal threaded spindle with axial bearings. Graduated drums with zero point adjustment, thus direct reading without conversion possible. With scale division 0.05 mm. The tables from 450 x 240 mm feature a water channel as well as a clamping lever on both axes, so that you can clamp in any position. Application: For use on drilling machines and for light milling work. Note: Other models and dimensions available on request. Clamping surface mm Number of T-slots Width of T-slots mm Distance of T-slots mm Longitudinal movement mm Cross motion mm Spindle pitch mm Load capacity kg full height (-0.01) Area mm Weight kg 3997 Order No. € 300 x 160 3 10 50 180 100 2 75 78 160 x 160 16 1237.00 …0010 450 x 240 3 14 60 275 155 5 280 126 259 x 200 52 C◊ B …0020 580 x 240 3 14 60 375 155 5 280 126 259 x 200 60 C◊ B …0030 ​ (W395) Coordinate table, with dovetail guide Design: Body and jaws made of alloy tool steel, hardened and precision ground. The stationary jaw is smooth, the mobile jaw comes with a horizontally ground V-block. Clamping and releasing through threaded spindle. Angle adjustment with a setting range of 0-46° is performed using gauge blocks according to the sinus principle; bearing pins and headed dowels are hardened and ground to an accuracy of 0.001 mm. The clamping device can be positively locked in every angular position. Angularity: 100 mm = 0.005 mm Parallelism:100 mm = 0.002 mm Angular deviation: at 45° ±15". Application: For high precision in tool making when grinding, milling, measuring, etc. Size Jaw width mm Clamping width mm Jaw height mm Total height mm Total length mm Clamping force kN Weight kg 3881 Order No. € 1 70 80 30 93 160 6 5.3 2709.00 …0070 2 90 120 40 113 210 7 11 4090.00 …0090 ​ (W337) Precision sine wave vice, PS-SV, with front rotating shank Formula for calculating the gauge block x: x = sin α • K (for support surface A) x = sin α • K + 1 (for support surface B) Example: Wanted: End measurement for angle adjustment of 24° 15'' on the precision sine bar machine vice PS-SV. Transmitted: K = 100, sin α = 0.4107. Calculation: x = 0.4107 • 100 = 41.07. The height of the gauge block 41.07 mm. Design: Body and jaws made of alloy tool steel, hardened and precision ground. The stationary jaw is smooth, the mobile jaw comes with a horizontally ground V-block. Clamping and releasing through threaded spindle. Side clamping surfaces for clamping claws. Angularity: 100 mm = 0.005 mm Parallelism:100 mm = 0.002 mm Application: Predominantly for use in tool making on grinding, milling and engraving machines, on jig drills, for measuring and inspection work, and for manufacturing processes requiring the most utmost clamping precision. Size Jaw width mm Clamping width mm Jaw height mm Total height mm Total length mm Clamping force kN Weight kg 3879 Order No. € 0 60 55 25 50 110 2 1.6 277.00 …0060 1 73 100 35 67 210 4 4 348.50 …0070 2 88 125 40 88 250 4 7.6 417.00 …0090 ​ (W337) Precision clamping fixture, PL-G with threaded spindle Machine vices 3.87

RkJQdWJsaXNoZXIy NTg4MTI=