Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/123 Design: Precision Universal 3D probe for installation into the milling spindle or the countersunk head. Probe insert change without tools. The enlarged travel path in combination with the tried and tested predetermined breaking point provide additional safety. For extremely easy handling, the Universal 3D probe is available with an integrated steep taper adaptor. The steep taper (ISO 7388-1 (DIN 69871), SK 40) and universal 3D probe form one unit. Application: For setting workpiece zero points and length measurements on milling and eroding machines (insulated probe tip) and for centring and taking the mean of bore holes and shafts. Scope of delivery: 3D probe and short probe tip Ø 4 mm. Shaft ∅ Probe with ball ∅ mm Display accuracy mm Housing ∅ mm Length without clamping shank mm 3770 Order No. € 20 mm 4 0.01 65 113 365.50 …0005 SK 40/ISO 73881 (DIN 69871) 4 0.01 65 113 394.50 …0010 (W392) Universal 3D probe IP67 Design: Further development of the proven mechanical 3D probe. The spindle or countersunk head can be positioned quickly and reliably on the reference edges. The start-up process can be traced accurately on the digital dial gauge. The zero setting is found immediately. Digit height on LCD display 8.5 mm. Function: Switch-on and switch-off, mm/inch-conversion. Application: For setting workpiece zero points and length measurements on milling and eroding machines (insulated probe tip) and for centring and taking the mean of bore holes and shafts. Scope of delivery: 3D probe with battery and short probe tip Ø 4 mm. Shaft ∅ mm Probe with ball ∅ mm Display accuracy mm Repeat accuracy mm Measuring accuracy mm Housing ∅ mm Length without clamping shank mm 3775 Order No. € 20 4 0.001 0.001 0.005 65 113 640.00 …0005 (W392) Digital 3D probe IP64 Design: Smallest 3D probe in the world, for incorporating in the milling spindle or countersunk head. The clamping shank has a diameter of 10 mm and can therefore also be used on machines with SK 30 or with small HSK spindles. The probe tip is replaced without tools. For maximum measuring accuracy, all 3D probes are individually measured and aligned during installation. The Zero Master can be equipped with a short (ball Ø 4 mm) and a long (ball Ø 8 mm) probe tip. The probe tips are compatible with all other Haimer 3D probes. Application: For setting workpiece zero points and length measurements on milling and eroding machines (insulated probe tip) and for centring and taking the mean of bore holes and shafts. Scope of delivery: 3D probe and short probe tip Ø 4 mm. Shaft ∅ mm Probe with ball ∅ mm Display accuracy mm Housing ∅ mm Length without clamping shank mm 3777 Order No. € 10 4 0.01 49 96 365.50 …0000 (W392) Zero Master, analogue IP64 Design: Further development of the Universal 3D probe, with improved mechanism and compact, handy housing for incorporating in the milling spindle or countersunk head. The probe tip is changed without requiring a tool; recalibration of the probe is not necessary. For maximum measuring accuracy, all 3D probes are individually measured and aligned during installation. Application: For setting workpiece zero points, length and depth measurements on milling and grinding machines (insulated probe tip) as well as for centring holes and shafts. Also used for testing the straightness and evenness of surfaces. Scope of delivery: 3D probe and short probe tip. Shaft ∅ mm Probe with ball ∅ mm Display accuracy mm Housing ∅ mm Length without clamping shank mm 3777 Order No. € 12 4 0.01 62 101 365.50 …0010 (W392) 3D probe, New Generation IP67 Probes 3.6
RkJQdWJsaXNoZXIy NTg4MTI=