Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/113 Design: From alloy case-hardened steel, with a core tensile strength of min. approx. 950 N/mm2 and a hardness depth of min. 0.5 mm. Taper to DIN 254. Taper angle tolerance: AT3 Taper surface roughness: Ra < 0.001 mm Hardened: 58 ± 2 HRC Application: For mounting drill chucks with inside taper. Chuck taper SK l1 mm 3359 Order No. € B 16 40 25 43.20 …0100 B 16 50 25 61.70 …0150 (W050) Drill chuck, mounting ISO 7388-1 A ≤ 10 µm Design: Surfaces ground and hardened. Application: For mounting and assembly tools with Morse taper shank. MT outer/inner Total length mm 3361 Order No. € 1/ 0 80 13.50 …0001 2/ 1 92 11.00 …0004 3/ 1 99 11.90 …0007 3/ 2 112 12.00 …0010 4/ 1 124 17.80 …0013 4/ 2 124 17.60 …0016 4/ 3 140 17.65 …0019 5/ 1 156 34.70 …0022 (W069) MT outer/inner Total length mm 3361 Order No. € 5/ 2 156 29.10 …0025 5/ 3 156 29.10 …0028 5/ 4 171 29.10 …0031 6/ 2 218 69.10 …0034 6/ 3 218 69.10 …0037 6/ 4 218 68.40 …0040 6/ 5 218 68.40 …0043 (W069) MT reducing sleeve DIN 2185 Design: From alloy case-hardened steel, with a core tensile strength of min. approx. 950 N/mm2 and a hardness depth of min. 0.5 mm. Taper to DIN 254. Taper angle tolerance: AT3 Taper surface roughness: Ra < 0.001 mm Hardened: 58 ± 2 HRC Application: For mounting three-jaw drill chucks with inside taper. Chuck taper d1 SK l1 mm 3359 Order No. € B 16 40 17 42.20 …0200 (W050) Drill chuck, mounting DIN 2080 A ≤ 10 µm Design: From alloy case-hardened steel, with a core tensile strength of min. approx. 950 N/mm2 and a hardness depth of min. 0.5 mm. Taper to DIN 254. Taper angle tolerance: AT3 Taper surface roughness: RA < 0.001 mm Drill tolerance: H5 Hardened: 58 ± 2 HRC Application: For mounting drill chucks with inner taper according to DIN 238 Chuck taper BT l1 mm 3359 Order No. € B 16 40 25 43.20 …0300 B 16 50 32 61.70 …0400 (W050) Drill chuck, mounting ISO 7388-2 A Drill chucks 3.5
RkJQdWJsaXNoZXIy NTg4MTI=