Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/107 Design: With thread or taper assembly, clockwise and anti-clockwise, impact resistant. Application: For universal drilling on electrical hand-operated, impact and standing drilling machines Scope of delivery: Key-type chuck with key. Clamping range mm Holding fixture Outer ∅ mm Open length mm Length closed mm 3403 Order No. € 0.5– 6.5 3/8" x 24 29.5 42.5 53 36.80 …0004 0.5– 6.5 B10 29.5 43 53 36.80 …0013 0.5– 8 B12 29.5 47.5 57.5 36.80 …0016 0.5– 8 3/8" x 24 29.5 42.5 53 36.80 …0001 1 –10 B16 42.8 63 77 41.10 …0014 0.8–10 B12 34.5 50 60.5 41.10 …0010 1 –10 1/2" x 20 33.35 49.5 61 27.10 …0007 1.5–13 B16 42.8 63 77 48.00 …0020 1 –13 1/2" x 20 42.4 59 74 34.00 …0017 1 –16 B18 56.5 79 98 96.60 …0031 3 –16 B16 65 67.5 86.5 61.70 …0023 5 –20 B22 65 92.5 113.5 192.00 …0034 (W316) Key-type chuck, impact resistant Design: Suitable for clockwise and anti-clockwise rotation, 1/4" hexagon holding fixture. Application: For stationary and hand-operated drills, particularly for percussion drills with 1/4" hexagonal holding fixture. Use only without impact function. Clamping range mm Holding fixture Size mm Outer ∅ mm Open length mm Length closed mm 3404 Order No. € 0.5–6.5 1/4" hex 6L 29.3 42.5 53 41.10 …0005 (W316) Key-type chuck, PRIMA 6L Design: Suitable for clockwise and anti-clockwise rotation , SDS-plus holding fixture. Carbide inserts in the clamping jaws. Application: For stationary and hand-operated drills, particularly for percussion drills with SDS-plus mount. Clamping range mm Holding fixture Size Outer ∅ mm Open length mm Length closed mm 3404 Order No. € 2.5–13 SDS-plus 13 42.9 68 81.5 82.50 …0010 (W316) Key-type hammer drill chuck, PRIMA HBF D Design: SDS-plus mounting shank for chucks. Scope of delivery: Assembly shank with screw. Holding fixture 3405 Order No. € 1/2" x 20 22.80 …0001 (W314) SDS-plus mounting shank Size suitable for chuck with chucking capacity Pin ∅ mm 3406 Order No. € S 1 0.5– 8 4 3.59 …0005 S 2 0.8–10/1.5–13 6 3.59 …0010 S 3 3 –16 8 4.99 …0015 S 4 5 –20 9 6.40 …0020 (W314) Replacement key for key-type chuck Drill chucks 3.5
RkJQdWJsaXNoZXIy NTg4MTI=