Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/105 Design: With female square. Application: For clamping taps with square carrier units. ER16/426G ∅ mm Square mm D mm L mm L2 mm 3357 Order No. ER16 € 2.8 2.1 16.7 27.5 18 48.60 …0001 3.5 2.7 16.7 27.5 18 48.60 …0004 4 3 16.7 27.5 18 48.60 …0007 4.5 3.4 16.7 27.5 18 48.60 …0010 5 4 16.7 27.5 18 48.60 …0013 5.5 4.5 16.7 27.5 18 48.60 …0016 6 4.9 16.7 27.5 18 48.60 …0019 7 5.5 16.7 27.5 18 48.60 …0022 8 6.2 16.7 27.5 22 48.60 …0025 9 7 16.7 27.5 22 48.60 …0028 (W348) ER20/428G ∅ mm Square mm D mm L mm L2 mm 3506 Order No. ER20 € 3.5 2.7 20.7 31.5 18 49.80 …0001 4 3 20.7 31.5 18 49.80 …0004 4.5 3.4 20.7 31.5 18 49.80 …0007 5 4 20.7 31.5 18 49.80 …0010 5.5 4.5 20.7 31.5 18 49.80 …0013 6 4.9 20.7 31.5 18 49.80 …0016 7 5.5 20.7 31.5 18 49.80 …0019 8 6.2 20.7 31.5 22 49.80 …0022 9 7 20.7 31.5 22 49.80 …0025 10 8 20.7 31.5 25 49.80 …0028 (W348) ER25/430G ∅ mm Square mm D mm L mm L2 mm 3508 Order No. ER25 € 4.5 3.4 25.7 34 18 52.10 …0007 5 4 25.7 34 18 52.10 …0010 5.5 4.5 25.7 34 18 52.10 …0013 6 4.9 25.7 34 18 52.10 …0016 7 5.5 25.7 34 18 52.10 …0019 8 6.2 25.7 34 22 52.10 …0022 9 7 25.7 34 22 52.10 …0025 10 8 25.7 34 25 52.10 …0028 11 9 25.7 34 25 52.10 …0031 12 9 25.7 34 25 52.10 …0034 14 11 25.7 34 25 52.10 …0037 16 12 25.7 34 25 52.10 …0040 (W348) ER32/472G ∅ mm Square mm D mm L mm L2 mm 3509 Order No. ER32 € 4.5 3.4 32.7 40 18 55.50 …0004 5 4 32.7 40 18 55.50 …0007 5.5 4.5 32.7 40 18 55.50 …0010 6 4.9 32.7 40 18 55.50 …0013 7 5.5 32.7 40 18 55.50 …0016 8 6.2 32.7 40 22 55.50 …0019 9 7 32.7 40 22 55.50 …0022 10 8 32.7 40 25 55.50 …0025 11 9 32.7 40 25 55.50 …0028 12 9 32.7 40 25 55.50 …0031 14 11 32.7 40 25 55.50 …0034 16 12 32.7 40 25 55.50 …0037 18 14.5 32.7 40 33 55.50 …0040 20 16 32.7 40 33 55.50 …0043 (W348) Collet for taps, with female square DIN 6499 B Design: This quick-exchange insert can be used to quickly switch the machine from drilling to tapping. Morse taper mount with lug DIN 228-B. Application: Application usually takes place on vertical drilling machines and drilling machines with clockwise and anti-clockwise rotation. Note: With quick-exchange inserts E (drilling and countersinking) and GE (thread cutting) the machine can be quickly adapted. Type MT for hole in steel Ø mm L1 mm L2 mm D mm 1923 Order No. € 26 2 24 150 75.5 48 193.00 …0020 34 3 32 176 82 61 253.50 …0030 46 4 50 222 104 86 379.00 …0040 (W180) Quick-exchange chuck SF Tapping chucks 3.4
RkJQdWJsaXNoZXIy NTg4MTI=