Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/83 Design: Ready hardened and ground, coolant transfer hole, unhardened body. Without holding fixture. Application: For production of special designs. VDI I1 mm b mm H mm 3269 Order No. A1 € 30 85 130 76 110.00 …0001 40 100 151 96 203.50 …0004 50 125 160 120 254.00 …0007 (W060) VDI square, blank A1 DIN 69880 Design: Ready hardened and ground, coolant transfer hole, unhardened body. Without holding fixture. Application: For production of special designs. VDI d2 mm I1 mm 3272 Order No. A2 € 30 68 100 54.90 …0001 30 68 240 82.50 …0004 40 83 120 68.70 …0007 40 83 320 137.00 …0010 50 98 135 121.00 …0013 50 98 400 220.00 …0016 (W060) VDI cylinder, blank A2 DIN 69880 Design: With clamping strip. Application: To mount parting blades. VDI h1 mm b1 mm b2 mm h5 mm h6 mm I1 mm I2 mm 3273 3281 Order No. AR AL € € 30 26 7035 32 39 44 50 416.00 416.00 …0001 40 26 8542.54341.54450 438.00 438.00 …0004 40 32 8542.54341.54450 438.00 438.00 …0007 50 32 100 50 43 45 44 50 487.00 487.00 …0010 (W060) (W060) VDI cut-off tool holder, AR and AL DIN 69880 3281 3273 General note: VDI tool holders for CNC lathes comprise heat treatable steel with a strength of approx. 900 N/mm2, hardness of 56 ±2 HRC and hardness depth of minimum 0.5 mm. In addition, all VDI tool holders have a cylinder shank h6 with internal coolant supply and adjustable ball slot nozzles. Shank and supporting face hardened and ground, with coolant transfer hole. Other designs on request. VDI holding fixtures 3.2
RkJQdWJsaXNoZXIy NTg4MTI=