FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 3/74 Size mm 3100 3102 3104 Order No. UB set AB set GB set € € € 160 213.00 48.00 252.00 …0160 200 220.50 50.60 264.50 …0200 250 234.00 77.70 278.00 …0250 315 350.50 116.50 419.00 …0315 400/ 500 524.00 231.00 662.50 …0400 ​ (W302) (W302) (W302) Replacement jaw, for key bar three-jaw lathe chuck, DURO-T 3100 Reversible top jaw hardened, 16MnCr5, 3-piece set. 3102 Unstepped adapter jaws unhardened, 16MnCr5, 3-piece set. 3104 Base jaw with mounting screws, 16MnCr5, 3-piece set. 3104 3102 3100 Size mm Thread 3108 Order No. € 160/ 200 M8 x 1 x 22 2.84 …0001 250 M12 x 1.5 x 30 4.31 …0004 315 M12 x 1.5 x 35 4.31 …0007 400/ 500 M16 x 1.5 x 40 5.65 …0010 ​ (W338) Fixing bolt Design: Chuck body completely surface-hardened and balanced. Jaws in the chuck ground concentrically. Radial and axial run-out tolerances are twice as accurate as the values prescribed by DIN 69386/I. With quick jaw replacement system, visual marking for quick jaw replacement and jaw locking. High corrosion protection and splash-water edge on the outer contour. Good lubrication options of the highly stressed sliding surfaces. Application: For lathe applications, where high clamping forces and high concentricity and accurate repetition are required. Scope of delivery: With base jaws and reversible top jaws as well as safety key. Size mm Short taper Throughhole ∅ mm Height without jaws D mm F mm max. torque N•m max. clamping force kN Concentricity mm max. rpm rpm 3094 Order No. € 160 4 42 83.5 82.6 120 73 0.04 5400 C◊ …0001 160 5 42 87 104.8 120 73 0.04 5400 C◊ …0004 160 6 42 104 133.4 120 73 0.04 5400 C◊ …0007 200 5 52 101 104.8 155 114 0.06 4600 C◊ …0010 200 6 52 106 133.4 155 114 0.06 4600 C◊ …0013 200 8 52 125 171.4 155 114 0.06 4600 C◊ B …0016 250 6 62 117 133.4 190 185 0.06 4200 4400.00 B …0019 250 8 62 120 171.4 190 185 0.06 4200 C◊ B …0022 315 6 87 145 133.4 210 240 0.08 3300 C◊ B …0025 315 8 87 136 171.4 210 240 0.08 3300 C◊ B …0028 315 11 87 143 235 210 240 0.08 3300 C◊ B …0031 400 8 102 141 171.4 260 260 0.08 2200 C◊ B …0034 400 11 102 148 235 260 260 0.08 2200 C◊ B …0037 ​ (W302) Key bar three-jaw lathe chuck, DURO-T DIN 55029 Lathe chucks 3.2

RkJQdWJsaXNoZXIy NTg4MTI=