All prices quoted are non-binding recommended prices. 1/38 Design: With precision ground point as well as high concentricity and pitch accuracy. The TiN coating gives the drill a longer tool life with the same cutting data or higher cutting values to increase productivity. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 28 22 – – – – 33 22 – – 70 – – – – – 1075 28 24 – – – – 33 22 – – – 75 – – – – 1004 40 18 10 16 12 13 40 30 13 50 33 33 28 10 – – 1113 ∅ h8 mm Spiral length mm Total length mm STEEL < 700 N/mm2 f mm/rev PU 1075 1004 1113 Order No. € € € 1 12 34 0.016 10 2.01 4.08 2.54 …0100 1.1 14 36 0.016 10 – 3.84 2.64 …0110 1.2 16 38 0.016 10 – 4.11 2.64 …0120 1.3 16 38 0.016 10 – 3.73 2.54 …0130 1.4 18 40 0.016 10 – 3.62 2.43 …0140 1.5 18 40 0.05 10 1.77 3.38 2.22 …0150 1.6 20 43 0.05 10 – 3.24 2.14 …0160 1.7 20 43 0.05 10 – 3.24 2.30 …0170 1.8 22 46 0.05 10 – 2.95 2.26 …0180 1.9 22 46 0.05 10 – 3.03 2.22 …0190 2 24 49 0.05 10 1.51 2.49 1.81 …0200 2.1 24 49 0.063 10 1.70 2.97 2.14 …0210 2.2 27 53 0.063 10 1.74 3.03 2.18 …0220 2.3 27 53 0.063 10 1.74 3.03 2.18 …0230 2.4 30 57 0.063 10 1.74 3.05 2.18 …0240 2.5 30 57 0.063 10 1.65 4.11 2.04 …0250 2.6 30 57 0.08 10 1.78 3.24 2.26 …0260 2.7 33 61 0.08 10 1.82 3.24 2.30 …0270 2.8 33 61 0.08 10 1.78 3.24 2.26 …0280 2.9 33 61 0.08 10 1.77 3.24 2.18 …0290 3 33 61 0.08 10 1.65 2.68 2.04 …0300 3.1 36 65 0.08 10 1.90 3.41 2.38 …0310 3.2 36 65 0.1 10 1.88 3.41 2.34 …0320 3.25 36 65 0.1 10 – – 2.93 …0325 3.3 36 65 0.1 10 1.70 3.46 2.14 …0330 3.4 39 70 0.1 10 1.96 3.43 2.43 …0340 3.5 39 70 0.1 10 1.92 3.05 2.50 …0350 3.6 39 70 0.1 10 2.07 3.62 2.59 …0360 (W100) (W100) (W099) TiN TiN TiN Spiral drill, with cylindrical shank HSS DIN 338 N 25–30° 1075 TiN TiN-Tip jobber drill Note: Available as a set (Order No. 1075 on Ç 1/41). 1075 TiN 130° Continued on next page 1113 TiN Special self-centring point geometry for applications without previous centring. 1004 TiN Point thinning < Ø 2.4 mm similar to cross-grinding. Note: Available as a set (Order No. 1029 on Ç 1/41). 1004 TiN 118° 1113 TiN 118° Drills HSS/HSS-E 1.1
RkJQdWJsaXNoZXIy NTg4MTI=