FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/51 Design: DIN ISO 15488-B (DIN 6499 old). These collets set a standard from terms of precision for standard collet chucks. The super finish design with a surface roughness of < 1.6 µm offers a higher load ratio, higher rigidity and clamping forces as well as higher system concentricity. They are all protected against corrosion with the new FAHRION Protect coating. • Precise – Concentricity and repetition accuracy 5 µm. • Sturdy – Only 12 slots are required to sufficiently achieve the required clamping diameter bridging according to DIN ISO 15488-B . Our collets are significantly less prone to misalign in the lower clamping area as compared with 16-fold slotted collets. • Gentle – All longitudinal edges are not only deburred but also additionally rounded which thereby protects the inner cone on the collet chuck from any markings. This is precondition to ensuring constant high concentricity. Application: To mount tools with cylindrical shank according to DIN 1835-B, 1835-E, 6535-B and 6535-E. Note: Clamp diameter bridging is 1 mm (below Ø 2.0 mm = 0.5 mm). The largest Ø is always stated, i.e. Ø 16 mm clamps back to Ø 15 mm (labelling is e.g. GERC 32 F 470 E16). GERC11-B/4008E Ø mm D mm L mm 3595 Order No. € 1 11.3 18 29.50 …0601 1.5 11.3 18 29.50 …0604 2 11.3 18 29.50 …0607 2.5 11.3 18 29.50 …0610 3 11.3 18 24.00 …0613 3.5 11.3 18 24.00 …0615 4 11.3 18 24.00 …0616 4.5 11.3 18 24.00 …0618 5 11.3 18 24.00 …0619 5.5 11.3 18 24.00 …0621 6 11.3 18 24.00 …0622 6.5 11.3 18 24.00 …0624 7 11.3 18 24.00 …0625 ​ (W319) GERC16-B/426E ∅ mm D mm L mm 3595 Order No. € 1 17 27.5 28.60 …0001 1.5 17 27.5 28.60 …0004 2 17 27.5 28.60 …0007 2.5 17 27.5 28.60 …0010 3 17 27.5 22.60 …0013 4 17 27.5 22.60 …0016 5 17 27.5 22.60 …0019 6 17 27.5 22.60 …0022 7 17 27.5 22.60 …0025 8 17 27.5 22.60 …0028 9 17 27.5 22.60 …0031 10 17 27.5 22.60 …0034 ​ (W319) GERC20-B/428E ∅ mm D mm L mm 3595 Order No. € 2 21 31.5 29.50 …0501 2.5 21 31.5 29.50 …0504 3 21 31.5 23.40 …0507 4 21 31.5 23.40 …0510 5 21 31.5 23.40 …0513 6 21 31.5 23.40 …0516 7 21 31.5 23.40 …0519 8 21 31.5 23.40 …0522 9 21 31.5 23.40 …0525 10 21 31.5 23.40 …0528 11 21 31.5 23.40 …0531 12 21 31.5 23.40 …0534 13 21 31.5 23.40 …0537 ​ (W319) GERC25-B/430E ∅ mm D mm L mm 3595 Order No. € 2 26 34 31.20 …0101 2.5 26 34 31.20 …0104 3 26 34 24.00 …0107 4 26 34 24.00 …0110 5 26 34 24.00 …0113 6 26 34 24.00 …0116 7 26 34 24.00 …0119 8 26 34 24.00 …0122 9 26 34 24.00 …0125 10 26 34 24.00 …0128 11 26 34 24.00 …0131 12 26 34 24.00 …0134 13 26 34 24.00 …0137 14 26 34 24.00 …0140 15 26 34 24.00 …0143 16 26 34 24.00 …0146 ​ (W319) GERC32-B/470E ∅ mm D mm L mm 3595 Order No. € 3 33 40 25.50 …0201 4 33 40 25.50 …0204 5 33 40 25.50 …0207 6 33 40 25.50 …0210 7 33 40 25.50 …0213 8 33 40 25.50 …0216 9 33 40 25.50 …0219 10 33 40 25.50 …0222 11 33 40 25.50 …0225 12 33 40 25.50 …0228 13 33 40 25.50 …0231 14 33 40 25.50 …0234 15 33 40 25.50 …0237 16 33 40 25.50 …0240 17 33 40 25.50 …0243 18 33 40 25.50 …0246 19 33 40 25.50 …0249 20 33 40 25.50 …0252 ​ (W319) GERC40-B/472E ∅ mm D mm L mm 3595 Order No. € 3 41 46 44.20 …0301 4 41 46 32.90 …0304 5 41 46 32.90 …0307 6 41 46 32.90 …0310 7 41 46 32.90 …0313 8 41 46 32.90 …0316 9 41 46 32.90 …0319 ​ (W319) Collet, GERC-B, System ER DIN 6499 B Continued on next page Tool holders 3.1

RkJQdWJsaXNoZXIy NTg4MTI=