All prices quoted are non-binding recommended prices. 3/34 Design: From alloy case-hardened steel, with a core tensile strength of min. approx. 950 N/mm2 and a hardness depth of min. 0.5 mm. Taper to DIN 254. Modular design. Clamping (using a hex spanner) essentially increases clamping force in comparison to conventional chucks. At the same time, this secures the chuck against becoming loose during anti-clockwise rotation or being quickly decelerated from higher speeds. Sealing disc in chuck for inner coolant drills. Taper angle tolerance: AT3 Taper surface roughness: Ra < 0.001 mm Hardened 58 ± 2 HRC Application: Use on CNC machines and machining centres. To mount tools with cylindrical shank and internal cooling. Clamping range mm d2 mm l1 mm 3529 Order No. BT 40 € 0.3– 8 36 81 339.50 …0002 0.5–13 50 98 311.50 …0005 2.5–16 57 103 319.00 …0010 (W325) Clamping range mm d2 mm l1 mm 3530 Order No. BT 50 € 0.5–13 50 110 355.00 …0005 2.5–16 57 115 373.50 …0010 (W325) CNC short drill chuck for clockwise and anti-clockwise rotation ISO 7388-2 AD/B ≤ 20 µm Design: Rigidly designed guide elements with hardened and ground wearing parts. Machining is safe thanks to automatic blocking of the worm gear even when running anti-clockwise and quickly decelerated spindle. Taper angle tolerance: AT3 Taper surface roughness: Ra < 0.001 mm Application: For drilling, countersinking, reaming, thread cutting and for simple finishing milling work. Can be used in machining centres, turning, drilling and milling machines. Scope of delivery: Short drill chuck with hexagon spanner. Note: Higher speeds possible with special balancing. Also available as ULTRA design (concentricity 0.015 mm). Clamping range mm BT l1 mm l2 mm d1 mm d2 mm 3486 Order No. € 0.5–10 40 77 38 38 45 333.00 …0001 1 –16 40 88 – 50 – 305.50 …0007 1 –16 50 99 – 50 – 384.00 …0009 (W318) CNC short drill chuck for clockwise and anti-clockwise rotation ISO 7388-2 AD ≤ 30 µm Design: Material with tensile strength of 1600 to 1800 N/mm2, hardness of 52 ±2 HRC. Hydraulic fluid is compressed using a hydraulic clamping set (pressure screw, pressure pin, seal) using a hexagonal T-key. The pressure causes an even deformation of the expansion sleeve, which can cause the tool shank to be clamped with a high concentricity (max. 3 µm). Taper to DIN 254. Hole for data carrier/chip (Balluf). Taper angle tolerance: AT3 Maximum speed:. 40000 min-1 Optimum application temperature: 20–50 °C Coolant pressure maximum: 80 bar Adjustment track: 10 mm Scope of delivery: Hydraulic expansion clamping chuck with hexagonal T-key. d1 mm d2 mm d3 mm l1 mm l2 mm l3 mm l4 mm g A/F mm 3442 Order No. BT 40 € 6 26 49.5 90 37 10 29 M5 2.5 424.50 …0202 8 28 49.5 90 37 10 30 M6 3 424.50 …0205 10 30 49.5 90 41 10 35 M8 x1 3 424.50 …0208 12 32 49.5 90 46 10 40 M10 x 1 5 424.50 …0211 14 34 49.5 90 46 10 40 M10 x 1 5 424.50 …0214 16 38 49.5 90 49 10 46 M12 x 1 5 424.50 …0217 18 40 49.5 90 49 10 46 M12 x 1 5 424.50 …0220 20 42 49.5 90 51 10 47 M16 x 1 5 424.50 …0223 25 55 52 90 57 10 50 M16 x 1 5 424.50 …0226 (W326) d1 mm d2 mm d3 mm l1 mm l2 mm l3 mm l4 mm g A/F mm 3442 Order No. BT 50 € 6 26 49.5 90 37 10 29 M5 2.5 571.50 …0229 8 28 49.5 90 37 10 30 M6 3 571.50 …0232 10 30 49.5 90 41 10 35 M8 x1 4 571.50 …0235 12 32 49.5 90 46 10 36 M10 x 1 5 571.50 …0238 14 34 49.5 90 46 10 37 M10 x 1 5 571.50 …0241 16 38 49.5 90 49 10 40 M12 x 1 6 571.50 …0244 18 40 49.5 90 49 10 41 M12 x 1 6 571.50 …0247 20 42 49.5 90 51 10 42 M16 x 1 8 571.50 …0250 25 55 60 110 57 10 48 M16 x 1 8 571.50 …0253 32 63 70 115 61 10 61 M16 x 1 8 571.50 …0256 (W326) Hydraulic expansion chuck, short, slim ISO 7388-2 AD/B ≤ 3 µm d2 d1 l1 l2 Tool holders 3.1
RkJQdWJsaXNoZXIy NTg4MTI=