All prices quoted are non-binding recommended prices. 3/10 Design: From alloy case-hardened steel, with a core tensile strength of min. approx. 950 N/mm2 and a hardness depth of min. 0.5 mm. Low tendency to vibration due to rigid shank All functional surfaces precision machined and guaranteed quality due to double 100% control. Taper angle tolerance: AT3 Hardened: 60 –2 HRC Application: For clamping tools with cylindrical shank in Power Collet collets and in collets to ISO 15488 (DIN 6499). For high-speed machining and heavy machining. Increased cutting performance due to higher speeds, feed rates and greater depth of cut. The increased running smoothness due to the low-vibration geometry ensures better surface quality and protects the tool, spindle and machine. Scope of delivery: Scope of delivery: Collet chuck complete with Power Collet clamping nut. Note: Optimal cutting performance in conjunction with Power Collet collets. Clamping range mm Collet ∅ D mm L mm A mm 3045 Order No. SK 40 € 2–10 ER16 28 43 70 C◊ …0001 2–10 ER16 28 43 100 C◊ …0004 2–16 ER25 42 61.5 70 C◊ …0007 (W394) Clamping range mm Collet ∅ D mm L mm A mm 3045 Order No. SK 40 € 2–16 ER25 42 51 100 C◊ …0010 2–20 ER32 50 62 70 C◊ …0013 2–20 ER32 50 53 100 C◊ …0016 (W394) Collet chuck, Power Collet Chuck Dimension A differs when using standard collets according to ISO 15488. ISO 7388-1 AD/B ≤ 3 µm HSC HPC Design: Constant concentricity and repeatability of 0.003 mm at a distance of 3 x D (maximum 50 mm) in conjunction with FAHRION precision collet GERC-HP/-HPD/-HPDD (2 µm). Tighten using roller wrench without risk of injury. Up to 100 % higher holding torques than with conventional collet chucks. Insensitive to temperature fluctuations. Very good vibration damping and stability. Application: In the HSC and HPC range as well as for high-precision machining results. To mount tools with cylindrical shank as well as according to DIN 1835-B, 1835-E, 6535-B and 6535-E Note: Delivered without clamping nut and roller wrench. Clamping range mm Collet Clamping nut A mm D mm E mm G mm H mm 3567 Order No. SK 40 € 1–10 GERC16-HP/HPD/HPDD/GBD HPC16 70 30 55 28–45 16–31 122.00 …0016 1–10 GERC16-HP/HPD/HPDD/GBD HPC16 100 30 85 28–45 16–31 133.00 …0216 1–10 GERC16-HP/HPD/HPDD/GBD HPC16 160 30 117 28–45 16–31 189.50 …0316 1–16 GERC25-HP/HPD/HPDD/GBD HPC25 70 40 114 35–60 20–42 122.00 …0025 1–16 GERC25-HP/HPD/HPDD/GBD HPC25 100 40 114 35–60 20–42 133.00 …0225 1–16 GERC25-HP/HPD/HPDD/GBD HPC25 160 40 118 35–60 20–42 193.00 …0325 2–20 GERC32-HP/HPD/HPDD/GBD HPC32 70 50 99 55–75 42–62 122.00 …0032 2–20 GERC32-HP/HPD/HPDD/GBD HPC32 100 50 114 52–70 32–52 133.00 …0232 2–20 GERC32-HP/HPD/HPDD/GBD HPC32 160 50 135 42–70 28–55 193.00 …0332 (W315) Collet chuck, CENTRO P Further dimensions available on request. ISO 7388-1 AD/B ≤ 3 µm HSC HPC Design: With cylindrical shank, length 150 mm. Application: In the HSC and HPC range as well as for high-precision machining results. To mount tools with cylindrical shank as well as according to DIN 1835-B, 1835-E, 6535-B and 6535-E Note: Delivery without clamping nut. Clamping range mm Collet Clamping nut Z mm D mm L1 mm L2 mm E mm G mm H mm 3567 Order No. € 1– 5 GERC8-HP HPC8M 10 10 138 12 16 – – 160.00 …0050 1– 7 GERC11-HP HPC11M 16 16 133 17 68 18–36 12–26 142.00 …0055 1–10 GERC16-HP/HPD HPC16MS 16 22 117 33 68 28–48 16–35 142.00 …0060 (W315) Extension for precision collet chuck, CENTRO P A L ER Ø D 8° L1 L2 H Z D G E Tool holders 3.1
RkJQdWJsaXNoZXIy NTg4MTI=