FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/7 Design: Made of alloyed case hardening steel with central coolant a tensile strength in core of approx. 950 N/mm2. With a hardness depth of min. 0.5 mm. Taper angle tolerance: AT3 Taper surface roughness: Ra < 0.4 µm Drill tolerance: H5 Hardened: 58 ± 2 HRC Application: For clamping milling cutters with cylindrical shank and lateral driving plane in accordance with DIN 1835-B and DIN 6535-HB. Scope of delivery: Face chuck with clamping screw. d1 mm l1 mm d2 mm 3015 Order No. SK 40 € 6 50 25 41.00 …0001 6 100 25 50.40 …0004 6 160 25 84.80 …0007 8 50 28 38.10 …0010 8 100 28 49.30 …0013 8 160 28 79.50 …0016 10 50 35 38.10 …0019 10 100 35 49.30 …0022 10 160 35 79.50 …0025 12 50 42 38.10 …0028 12 100 42 49.30 …0031 12 160 42 79.50 …0034 14 50 44 38.10 …0037 14 100 44 49.30 …0040 14 160 44 79.50 …0043 16 63 48 38.10 …0046 16 100 48 49.30 …0049 16 160 48 79.50 …0052 18 63 50 38.10 …0055 18 100 50 49.30 …0058 18 160 50 79.50 …0061 20 63 52 38.10 …0064 20 100 52 49.30 …0067 20 160 52 79.50 …0070 25 100 65 49.30 …0073 25 160 65 90.10 …0076 32 100 72 51.50 …0079 32 160 72 95.00 …0082 40 120 80 66.10 …0085 ​ (W050) d1 mm l1 mm d2 mm 3025 Order No. SK 50 € 6 63 25 65.30 …0001 6 100 25 74.90 …0004 6 160 25 114.50 …0007 8 63 28 63.80 …0010 8 100 28 74.80 …0013 8 160 28 114.50 …0016 10 63 35 63.80 …0019 10 100 35 74.80 …0022 10 160 35 114.50 …0025 12 63 42 63.80 …0028 12 100 42 74.80 …0031 12 160 42 114.50 …0034 14 63 44 63.80 …0037 14 100 44 74.80 …0040 14 160 44 114.50 …0043 16 63 48 63.80 …0046 16 100 48 74.80 …0049 16 160 48 114.50 …0052 18 63 50 63.80 …0055 18 100 50 74.80 …0058 18 160 50 114.50 …0061 20 63 52 63.80 …0064 20 100 52 74.80 …0067 20 160 52 114.50 …0070 25 80 65 70.40 …0073 25 120 65 90.30 …0076 25 160 65 119.00 …0079 32 100 72 77.00 …0082 32 160 72 125.00 …0085 40 100 80 83.70 …0088 50 120 120 169.00 …0091 ​ (W050) Weldon system surface clamping chuck ISO 7388-1 AD/B ≤ 3 µm Design: Made of alloy case-hardened steel, with central cooling channel drill hole and lateral coolant channel slots, with a core tensile strength of approx. 950 N/mm2 and a hardness depth of min. 0.5 mm. Taper to DIN 254. Taper angle tolerance: AT3 Taper surface roughness: Ra < 0.001 mm Drill tolerance: H5 Application: For clamping milling cutters with cylindrical shank and lateral driving plane in accordance with DIN 1835-B and DIN 6535-HB. Scope of delivery: Face chuck with clamping screw. d1 mm l1 mm d2 mm 3027 Order No. SK 40 € 6 50 25 61.70 …0001 8 50 28 59.40 …0004 10 50 35 59.40 …0007 12 50 42 59.40 …0010 14 50 44 59.40 …0013 ​ (W050) d1 mm l1 mm d2 mm 3027 Order No. SK 40 € 16 63 48 59.40 …0016 18 63 50 59.40 …0019 20 63 52 59.40 …0022 25 100 65 70.40 …0025 32 100 72 72.70 …0028 ​ (W050) Weldon system, surface clamping chuck, with cooling channel slots ISO 7388-1 AD/B ≤ 3 µm d2 d1 l1 d2 d1 l1 Tool holders 3.1

RkJQdWJsaXNoZXIy NTg4MTI=