Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 2/55 ISO designation Shank-Y mm L mm L1 mm f mm h1 mm Design Indexable insert 2969 Order No. € STGCR 1616 H11 16–16 100 20 20 16 Right TCGT/TCMT 1102... 62.10 …5650 STGCL 1616 H11 16–16 100 20 20 16 Left TCGT/TCMT 1102... 62.10 …5655 STGCR 1616 H16 16–16 100 20 20 16 Right TCGT/TCMT 16T3... 62.10 …5660 STGCL 1616 H16 16–16 100 20 20 16 Left TCGT/TCMT 16T3... 62.10 …5665 STGCR 2020 K16 20–20 125 20 25 20 Right TCGT/TCMT 16T3... 69.00 …5670 STGCL 2020 K16 20–20 125 20 25 20 Left TCGT/TCMT 16T3... 69.00 …5675 STGCR 2525 M16 25–25 150 20 32 25 Right TCGT/TCMT 16T3... 85.50 …5680 STGCL 2525 M16 25–25 150 20 32 25 Left TCGT/TCMT 16T3... 85.50 …5685 (W285) ISO clamping holder, 90°, STGCR/L Fig.: Right-hand version Delivery without indexable inserts. Design PU 2969 5840 5886 Order No. € € € Supporting plate for insert 16 10 ∆ 10.70 – – …5009 Hexagonal threaded socket 10 ∆ 8.35 – – …5057 Screw for insert 11 10 ∆ 3.47 – – …5027 Screw for insert 16 10 ∆ 3.64 – – …5030 Hexagonal offset screwdriver 3.5 mm 1 – 0.37 – …0035 Screwdriver for insert 11, T8 x 60 mm 1 – – 6.70 …0030 Screwdriver for insert 16, T15 x 80 mm 1 – – 6.90 …0050 (W281) (W528) (W543) Spare part ∆ Can only be supplied as a whole packaging unit. Supporting plate Hexagonal threaded socket Screw Key L-wrench Screwdriver ISO designation Cutting materials Cutting speed Cutting depth feed P Steel M Stainless K Cast N Aluminium S Super-alloy H Hard PU 2968 Order No. € DCMT 11T308 UNI vc m/min f mm/rev ap mm 80–165 0.08–0.48 0.8–2.0 45–95 0.08–0.36 0.8–1.5 75–155 0.08–0.48 0.8–2.0 – – – – – – – – – 10 ∆ 6.80 …2348 DCMT 11T308-M PK 9015 vc m/min f mm/rev ap mm 165–230 0.15–0.48 0.8–2 – – – 155–215 0.15–0.48 0.8–2 – – – – – – – – – 10 ∆ 8.90 …0308 DCMT 11T308-M U 9035 vc m/min f mm/rev ap mm 80–165 0.08–0.48 0.8–2 45–95 0.08–0.36 0.8–1.5 75–155 0.08–0.48 0.8–2 120–575 0.08–0.48 0.8–2 25–55 0.08–0.3 0.8–1.5 – – – 10 ∆ 8.05 …0315 DCMT 11T312-M PMK 9030 vc m/min f mm/rev ap mm 95–205 0.15–0.7 1.2–2 55–120 0.15–0.53 1.2–1.5 90–190 0.15–0.7 1.2–2 – – – – – – – – – 10 ∆ 8.50 …0318 (W291,W286) Continued ∆ Can only be supplied as a whole packaging unit. ISO indexable insert L L Positive turning 22.4
RkJQdWJsaXNoZXIy NTg4MTI=