FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/348 Design: Unevenly twisted and unevenly pitched, cutting tips with 45° corner cutting chamfer. Precision balanced. Shank compatible with HAIMER® SafeLock. Application: Universally applicable for roughing and smoothing, with utmost machining performance at very regular run. For large cutting depths in steel and INOX materials. The dynamic rotation allows HPC application with increased cutting values at ideal chipping values. Safe-Lock shank advantages: • Maximum extraction protection • Best concentricity • Maximum machining volumes • Constant holding forces and torques also with tool holders without Safe-Lock Note: From ∅ 12 mm, the use of the HAIMER® Safe-Lock clamping chuck (Order No. 3426 or 3511) is recommended. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 260 140 – 120 90 – 210 170 70 – – – – – – – 2815 ∅ d1 = h9 mm Cutting length l2 mm Neck grinding l3 mm Neck ∅ d3 mm Total length l1 mm Shank ∅ d2 = h5 mm Corner chamfer 45° mm INOX ferrite/martens. fz mm 2815 Order No. € 6 18 24 5.7 62 6 0.2 0.051 71.20 …0600 8 24 32 7.6 70 8 0.2 0.068 83.90 …0800 10 30 40 9.5 82 10 0.3 0.085 139.50 …1000 12 36 48 11.4 95 12 0.3 0.102 194.00 …1200 16 48 64 15.2 115 16 0.5 0.136 365.00 …1600 20 60 80 19 133 20 0.6 0.17 536.50 …2000 ​ (W213) LOTUS High-performance cutter, FORMAT GT, INOX, DTC, Safe-Lock Solid carbide INOX 5 46°/47° DTC 45° LOTUS Design: Made of heat-resistant hot working steel. Suitable for HSS and carbide tools. Taper angle: Tolerance AT3 Shank tolerance: h6 Application: Suitable for inductive, contact and hot air shrink devices. Scope of delivery: Shrink-fit chuck with length setting screw. ∅ D1 mm SK ∅ D2 mm ∅ D3 mm L mm A mm 3436 Order No. € 6 40 21 27 36 80 103.50 …0600 8 40 21 27 36 80 103.50 …0800 10 40 24 32 42 80 103.50 …1000 12 40 24 32 47 80 103.50 …1200 16 40 27 34 50 80 103.50 …1600 20 40 33 42 52 80 103.50 …2000 25 40 44 53 58 100 115.50 …2500 ​ (W373) Shrink-fit chuck, FORMAT GT ISO 7388-1 AD ≤ 3 µm O O G G O G 4.5° 10 D2 D1 D3 A L Solid carbide milling cutters 1.9

RkJQdWJsaXNoZXIy NTg4MTI=