FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/345 ∅ d1 = h10 mm Cutting length l2 mm Neck grinding l3 mm Neck ∅ d3 mm Total length l1 mm Shank ∅ d2 = h6 mm Corner radius mm INOX ferrite/martens. fz mm 2808 Order No. € 12 26 38 11.5 83 12 0.5 0.0437 68.00 …1200 12 26 38 11.5 83 12 1 0.0437 68.00 …1201 12 26 38 11.5 83 12 1.5 0.0437 68.00 …1202 12 26 38 11.5 83 12 2 0.0437 68.00 …1203 12 26 38 11.5 83 12 2.5 0.0437 68.00 …1204 12 26 38 11.5 83 12 3 0.0437 68.00 …1205 12 26 38 11.5 83 12 4 0.0437 68.00 …1206 16 32 44 15.5 92 16 0.5 0.0589 103.50 …1600 16 32 44 15.5 92 16 1 0.0589 103.50 …1601 16 32 44 15.5 92 16 1.5 0.0589 103.50 …1602 16 32 44 15.5 92 16 2 0.0589 103.50 …1603 16 32 44 15.5 92 16 2.5 0.0589 103.50 …1604 16 32 44 15.5 92 16 3 0.0589 103.50 …1605 16 32 44 15.5 92 16 4 0.0589 103.50 …1606 20 38 54 19.5 104 20 0.5 0.0706 153.00 …2000 20 38 54 19.5 104 20 1 0.0706 153.00 …2001 20 38 54 19.5 104 20 1.5 0.0706 153.00 …2002 20 38 54 19.5 104 20 2 0.0706 153.00 …2003 20 38 54 19.5 104 20 2.5 0.0706 153.00 …2004 20 38 54 19.5 104 20 3 0.0706 153.00 …2005 20 38 54 19.5 104 20 4 0.0706 153.00 …2006 ​ (W201) TiAlN Continued HPC torus cutter, 35°/38°, helical pitch, FORMAT GT, INOX Design: Unevenly twisted and unevenly pitched, cutting tips with 45° corner cutting chamfer with ground away shank. Application: Universally applicable for roughing and smoothing, with utmost machining performance at very regular run. For large cutting depths in INOX and titanium materials. The dynamic rotation allows HPC application with increased cutting values at ideal chipping values. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – – 90 – – – – 45 – – – – – – – 2805 ∅ d1 = h10 mm Cutting length l2 mm Neck grinding l3 mm Neck ∅ d3 mm Total length l1 mm Shank ∅ d2 = h6 mm Corner chamfer 45° mm INOX ferrite/martens. fz mm 2805 Order No. € 3 8 18 2.8 57 6 0.2 0.012 23.30 …0300 4 11 21 3.8 57 6 0.2 0.016 23.30 …0400 5 13 21 4.8 57 6 0.2 0.02 23.30 …0500 6 13 21 5.5 57 6 0.2 0.022 23.30 …0600 8 19 27 7.5 63 8 0.2 0.033 31.60 …0800 10 22 32 9.5 72 10 0.2 0.043 43.40 …1000 12 26 38 11.5 83 12 0.3 0.065 59.50 …1200 14 26 42 13.5 83 14 0.3 0.07 87.90 …1400 16 32 44 15.5 92 16 0.3 0.073 91.20 …1600 18 32 50 17.5 92 18 0.4 0.075 131.50 …1800 20 38 54 19.5 104 20 0.4 0.077 135.00 …2000 ​ (W201) TiAlN HPC end mill, 35°/38°, helical pitch, FORMAT GT, INOX Solid carbide INOX 4 DIN 6535-HB 35°/38° HPC 45° TiAlN O O G G O G Solid carbide milling cutters 1.9

RkJQdWJsaXNoZXIy NTg4MTI=