Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/343 Design: Unevenly twisted and unevenly pitched, cutting tips with 45° corner cutting chamfer with ground away shank. Application: Universally applicable for roughing and smoothing, with utmost machining performance at very regular run. For large cutting depths in INOX and titanium materials. The dynamic rotation allows HPC application with increased cutting values at ideal chipping values. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – – 90 – – – – 45 – – – – – – – 2803 ∅ d1 = h10 mm Cutting length l2 mm Total length l1 mm Corner chamfer 45° mm INOX ferrite/martens. fz mm 2803 Order No. € 3 6 54 0.13 0.012 18.80 …0300 4 8 54 0.18 0.016 18.80 …0400 5 9 54 0.2 0.02 18.80 …0500 6 10 54 0.2 0.022 18.80 …0600 8 12 58 0.2 0.034 23.30 …0800 10 14 66 0.2 0.045 32.60 …1000 12 16 73 0.3 0.05 46.60 …1200 14 18 75 0.3 0.06 77.50 …1400 16 22 82 0.3 0.075 80.30 …1600 18 24 84 0.4 0.075 121.00 …1800 20 26 92 0.4 0.08 121.00 …2000 (W201) TiAlN HPC end mill, 35°/38°, helical pitch, FORMAT GT, INOX HPC 45° TiAlN Design: Unevenly twisted and unevenly pitched, cutting tips with 45° corner cutting chamfer, with ground away shank. Application: Universally applicable for roughing and smoothing, with utmost machining performance at very regular run. For large cutting depths in INOX and titanium materials. The dynamic rotation allows HPC application with increased cutting values at ideal chipping values. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 141 92 57 74 60 – 127 92 53 – – – – – – – 2807 ∅ d1 = h10 mm Cutting length l2 mm Neck grinding l3 mm Neck ∅ d3 mm Total length l1 mm Shank ∅ d2 = h6 mm INOX ferrite/martens. fz mm 2807 Order No. € 3 8 18 2.75 57 6 0.0101 25.20 …0300 4 11 21 3.5 57 6 0.021 25.20 …0400 5 13 21 4.5 57 6 0.0294 25.20 …0500 6 13 21 5.5 57 6 0.0294 25.20 …0600 8 19 27 7.5 63 8 0.0378 34.20 …0800 10 22 32 9.5 72 10 0.0631 47.00 …1000 12 26 38 11.5 83 12 0.0631 64.50 …1200 16 32 44 15.5 92 16 0.0841 98.80 …1600 20 38 54 19.5 104 20 0.1009 146.50 …2000 (W201) TiAlN HPC end mill, 35°/38°, helical pitch, FORMAT GT, INOX HPC 90° TiAlN Solid carbide INOX 4 DIN 6535-HB 35°/38° Solid carbide INOX 4 DIN 6535-HB 35°/38° O O G G O G Solid carbide milling cutters 1.9
RkJQdWJsaXNoZXIy NTg4MTI=