Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/333 Design: With centre cut, suitable for drilling. Application: Can be used for copy milling and slot milling as well as for universal machining. Note: Copy milling; cutting values preferred at ap = 0.05 x d1 and ae = 0.1 x d1. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 150 120 96 130 104 83 140 112 80 370 295 – – – – – 2465 ∅ d1 = h10 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm STEEL < 1400 N/mm2 fz mm 2465 Order No. € 2 6 57 6 0.02 27.10 …0200 3 7 57 6 0.02 27.10 …0300 4 8 57 6 0.025 27.10 …0400 5 10 57 6 0.03 27.10 …0500 6 10 57 6 0.03 27.10 …0600 8 16 63 8 0.035 34.50 …0800 10 19 72 10 0.4 44.70 …1000 12 22 83 12 0.05 62.30 …1200 (W220) Fire Ball nose slot cutter Solid carbide N 2 DIN 6527 DIN 6535-HA 30° Fire Design: With centre cut, suitable for drilling. Application: Can be used for copy milling. The neck chip channel makes optimum tool range possible and thus makes it suitable for mould-making applications. Note: Copy milling; cutting values preferred at ap = 0.05 x d1 and ae = 0.1 x d1. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 200 160 128 160 128 102 200 160 22 120 110 90 – 120 – – 2485 ∅ d1 = h8 mm Radius r ±0.01 mm Cutting length l2 mm Neck grinding l3 mm Neck ∅ d3 mm Total length l1 mm Shank ∅ d2 = h6 mm GEH. STEEL < 55 HRC fz mm 2485 Order No. € 2 1 3 20 1.8 57 6 0.03 83.40 …0020 3 1.5 3.5 20 2.8 57 6 0.04 83.40 …0030 4 2 4 20 3.8 57 6 0.045 81.40 …0040 6 3 6 20 5.6 57 6 0.05 81.40 …0060 8 4 7 26 7.6 63 8 0.07 82.40 …0080 10 5 8 30 9.6 72 10 0.1 101.50 …0100 12 6 10 35 11.5 83 12 0.12 150.50 …0120 (W221) Signum HSC copy mill, with full radius Solid carbide N 2 DIN 6535-HA 30° Signum Solid carbide milling cutters 1.9
RkJQdWJsaXNoZXIy NTg4MTI=