FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/313 Design: With centre cut, suitable for drilling. Application: Can be used for universal machining. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 120 120 80 – – – 120 96 70 145 145 106 – – – – 2361 107 8068 80 60 – 80 67 – 270 190 150 – – – – 2340 ∅ d1 = h10 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm STEEL < 1000 N/mm2 fz mm 2361 2340 Order No. € € 3 7 57 6 0.005 21.30 12.45 …0300 4 8 57 6 0.007 21.30 12.45 …0400 5 10 57 6 0.008 21.30 12.45 …0500 6 10 57 6 0.012 21.30 12.40 …0600 7 13 63 8 0.012 28.80 – …0700 8 16 63 8 0.016 28.20 15.45 …0800 9 16 72 10 0.016 41.70 – …0900 10 19 72 10 0.02 41.00 22.70 …1000 12 22 83 12 0.024 59.20 32.40 …1200 14 22 83 14 0.024 75.60 – …1400 16 26 92 16 0.038 100.00 65.70 …1600 18 26 92 18 0.038 131.50 – …1800 20 32 104 20 0.048 158.00 100.50 …2000 (W212) (W033) TiAlN AlTiN+ Milling cutter Solid carbide NH 3 DIN 6535-HB 45° 2340 AlTiN+ 2361 TiAlN DIN 6527 Set content ∅ mm 2361 Order No. € 4; 5; 6; 8; 10; 12 148.00 …0010 (W212) TiAlN Milling cutter set TiAlN Solid carbide milling cutters 1.9

RkJQdWJsaXNoZXIy NTg4MTI=