FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/14 Application: Suitable for use on NC machines, hand drills and lathes. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 25 22 – – – – 30 20 – 50 – – – – – – 1055 25 22 – – – – 25 20 – 50 – – – – – – 1056 47 21 11 20 16 20 48 37 20 40 50 50 30 11 – – 1050 32 16 10 9 8 14 32 25 14 36 38 38 20 10 – – 1088 ∅ h8 mm Spiral length mm Total length mm STEEL < 700 N/mm2 f mm/rev PU 1055 1056 1050 1088 Order No. € € € € 1055 1056 1050/ 1088 0.5 3 20 0.012 – – – – – – 6.65 …0050 0.6 3.5 21 0.012 – – – – – – 7.05 …0060 0.7 4.5 23 0.012 – – – – – – 6.30 …0070 0.8 5 24 0.012 – – – – – – 5.10 …0080 0.9 5.5 25 0.012 – – – – – – 5.35 …0090 1 6 26 0.012 10 10 – 1.14 3.28 – 3.12 …0100 1.1 7 28 0.032 – – – – – – 3.75 …0110 1.2 8 30 0.032 – – – – – – 3.62 …0120 1.3 8 30 0.032 – – – – – – 3.56 …0130 1.4 9 32 0.032 – – – – – – 3.73 …0140 1.5 9 32 0.032 10 10 – 1.12 2.86 – 2.53 …0150 1.6 10 34 0.032 – – – – – – 3.27 …0160 1.7 10 34 0.032 – – – – – – 3.42 …0170 1.8 11 36 0.032 – – – – – – 3.52 …0180 1.9 11 36 0.032 – – – – – – 3.24 …0190 2 12 38 0.032 10 10 – 1.38 2.07 – 2.18 …0200 2.1 12 38 0.04 – – – – – – 3.27 …0210 2.2 13 40 0.04 – – – – – – 3.24 …0220 2.25 13 40 0.04 – – – – – – 4.71 …0225 2.3 13 40 0.04 – – – – – – 3.17 …0230 2.4 14 43 0.04 – – – – – – 3.30 …0240 2.5 14 43 0.04 10 10 – 1.38 2.46 – 2.38 …0250 2.6 14 43 0.05 – – – – – – 3.06 …0260 2.65 14 43 0.05 – – – – – – 3.46 …0265 2.7 16 46 0.05 – – – – – – 3.42 …0270 2.8 16 46 0.05 – – – – – – 3.42 …0280 2.9 16 46 0.05 – – – – – – 3.56 …0290 3 16 46 0.08 10 10 – 1.38 2.46 9.50 2.33 …0300 3.1 18 49 0.08 10 10 – 1.38 3.14 13.50 3.30 …0310 3.2 18 49 0.1 10 10 – 1.38 3.03 13.50 3.30 …0320 3.25 18 49 0.1 – – – – – – 2.98 …0325 3.3 18 49 0.1 10 10 – 1.38 3.14 9.30 2.26 …0330 ​ (W100) (W101) (W099) (W099) steam steam TiN TiN Short drill, with cylinder shank HSS DIN 1897 N 25–30° ≤ 2.4 mm ≥ 2.5 mm 1055 steam Design: Bright surface, steam tempered from 2.5 mm, with precision ground point. 1056 steam Design: Bright surface, steam tempered from 2.5 mm, with precision ground point. 1050 TiN Design: A520, with precision ground point as well as high concentricity and pitch accuracy. With the special Dormer ADX geometry, you achieve improved drilling quality in addition to significantly increased performance. TiN coating 1088 TiN Design: A022, with precision ground point as well as high concentricity and pitch accuracy. Special self-centring point geometry for applications without previous centring. From ∅2.00mm with TiN-Tip-coating. 1088 TiN 135° 1050 TiN 130° 1056 steam 118° 1055 steam 118° Continued on next page Drills HSS/HSS-E 1.1

RkJQdWJsaXNoZXIy NTg4MTI=