FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/299 Set content ∅ mm 2214 Order No. € 6; 8; 10; 12; 16 181.50 …0010 (W214) TiAlN Roughing end mill set TiAlN Design: Suitable for drilling up to Ø 25. HSS-E PM has outstanding durability (greater edge stability, more wear-resistant) and a longer tool life. Suitable for use in inconsistent cutting operations. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 80 64 51 35 28 22 60 48 30 – 150 – – – – – 2218 ∅ d1 = k12 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm Number of teeth STEEL < 1000 N/mm2 fz mm 2218 Order No. € 6 13 57 6 4 0.029 45.60 …0060 8 19 69 10 4 0.042 55.60 …0080 10 22 72 10 4 0.053 57.90 …0100 12 26 83 12 4 0.063 65.70 …0120 14 26 83 12 4 0.079 92.40 …0140 16 32 92 16 4 0.079 112.50 …0160 18 32 92 16 4 0.097 133.50 …0180 20 38 104 20 4 0.097 135.00 …0200 25 45 121 25 5 0.14 189.50 …0250 32 53 133 32 6 0.14 260.50 …0320 (W205) Fire Roughing end mill HSS-E PM NRf 4–6 DIN 844-K DIN 1835-B 30° Fire Cooling lubricant opta Cool 700 S For processing steel and stainless steel. Very good performance for drilling, boring, milling and tapping. On Ç 9/142. < > End mills HSS-E/HSS-E PM 1.8

RkJQdWJsaXNoZXIy NTg4MTI=