FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/293 Design: Up to ∅ 28 mm with centre cutting. Application: Can be used for peripheral and end milling. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 30 25 15 – – – – – – 60 55 45 – – – – 2178 ∅ d1 = k10 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm Number of teeth STEEL < 1400 N/mm2 fz mm 2178 Order No. € 5 24 68 6 4 0.014 11.05 …0500 6 24 68 6 4 0.019 11.00 …0600 7 30 80 10 4 0.019 15.45 …0700 8 38 88 10 4 0.029 15.25 …0800 9 38 88 10 4 0.029 16.45 …0900 10 45 95 10 4 0.036 15.25 …1000 11 45 102 12 4 0.036 22.70 …1100 12 53 110 12 4 0.047 21.00 …1200 14 53 110 12 4 0.054 23.90 …1400 16 63 123 16 4 0.058 29.10 …1600 18 63 123 16 4 0.065 36.00 …1800 20 75 141 20 4 0.074 43.00 …2000 22 75 141 20 5 0.049 71.20 …2200 24 90 166 25 6 0.049 102.00 …2400 25 90 166 25 6 0.046 69.00 …2500 26 90 166 25 6 0.046 109.00 …2600 28 90 166 25 6 0.047 93.30 …2800 30 90 166 25 6 0.047 99.90 …3000 32 106 186 32 6 0.054 112.50 …3200 (W206) bright Milling cutter HSS Co8 N 4–6 DIN 844-L DIN 1835-B 30° bright Design: With centre cut, suitable for drilling. HSS-E PM has outstanding durability (greater edge stability, more wear-resistant) and a longer tool life. Suitable for use in inconsistent cutting operations. Application: Can be used for peripheral and end milling. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 66 53 42 – – 42 45 36 26 144 132 108 – – – – 2168 ∅ d1 = k10 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm STEEL < 1000 N/mm2 fz mm 2168 Order No. € 8 19 69 10 0.042 59.00 …0080 10 22 72 10 0.05 60.20 …0100 12 26 83 12 0.059 67.90 …0120 14 26 83 12 0.071 91.30 …0140 16 32 92 16 0.071 90.10 …0160 20 38 104 20 0.09 110.50 …0200 (W205) Fire Milling cutter HSS-E PM N 4 DIN 844-K DIN 1835-B 35°/38° Fire End mills HSS-E/HSS-E PM 1.8

RkJQdWJsaXNoZXIy NTg4MTI=