Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/289 Design: With centre cut, suitable for drilling. HSS-E PM has outstanding durability (greater edge stability, more wearresistant) and a longer tool life. Suitable for use in inconsistent cutting operations. Application: Can be used for milling keyways and fitted key grooves, Ø tolerance e8 for fit P9 as well as for peripheral milling. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 55 45 25 – – – 55 – – – – – – – – – 2155 ∅ d1 = e8 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm STEEL < 1400 N/mm2 fz mm 2155 Order No. € 3 8 52 6 0.008 21.00 …0300 3.5 10 54 6 0.008 20.50 …0350 4 11 55 6 0.012 21.00 …0400 4.5 11 55 6 0.012 21.00 …0450 5 13 57 6 0.013 21.00 …0500 5.5 13 57 6 0.013 20.50 …0550 (W208) TiAlN Slot drill (slot cutter) HSS-E PM N 3 DIN 844-K DIN 1835-B 30° TiAlN Design: With centre cut, suitable for drilling. Application: Can be used for milling keyways and fitted key grooves, Ø tolerance e8 for fit P9 as well as for peripheral milling. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 30 25 15 – – – – – – 100 – – – – – – 2154 ∅ d1 = e8 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm STEEL < 1400 N/mm2 fz mm 2154 Order No. € 3 8 52 6 0.003 10.45 …0300 4 11 55 6 0.005 10.15 …0400 5 13 57 6 0.008 10.45 …0500 6 13 57 6 0.011 10.45 …0600 7 16 66 10 0.011 14.20 …0700 8 19 69 10 0.018 13.80 …0800 9 19 69 10 0.018 14.20 …0900 10 22 72 10 0.023 14.20 …1000 12 26 83 12 0.028 18.75 …1200 16 32 92 16 0.037 25.40 …1600 20 38 104 20 0.042 37.30 …2000 22 38 104 20 0.048 41.60 …2200 (W206) bright Slot drill (slot cutter) HSS Co8 N 3 DIN 844-K DIN 1835-B 30° bright Continued on next page 3 DIN 844-K DIN 1835-B 30° End mills HSS-E/HSS-E PM 1.8
RkJQdWJsaXNoZXIy NTg4MTI=