FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/280 Design: Profile relief-ground, with longitudinal and crosswise slot. Application: Usable as face-milling, step-milling and plain milling cutter. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 40 30 – 16 11 – 22 26 – – – 42 – – – – 2019 40 30 – 16 11 – 22 26 – – – 42 – – – – 2022 50 44 – 22 14 – 28 33 – – – 52 – – – – 2025 ∅ x width d1 x b1 mm Bore d2 = H7 mm Number of teeth STEEL < 1000 N/mm2 fz mm 2019 2022 2025 Order No. € € € 40 x 32 16 6 0.071 91.40 88.30 123.00 …0001 50 x 36 22 6 0.077 122.00 118.50 175.00 …0004 63 x 40 27 8 0.091 177.00 157.50 223.50 …0007 80 x 45 27 8 0.1 286.50 255.00 335.00 …0010 100 x 50 32 10 0.119 517.50 400.50 579.00 …0013 (W200) (W200) (W202) bright bright TiAlN Shell end mill HSS Co8 DIN 1880 DIN 138 30° 2019 bright Rough finish toothed. 2022 bright Rough toothed. 2025 TiAlN Rough toothed. 2025 TiAlN NR 2022 bright NR 2019 bright NF Design: Profile ground, with longitudinal and crosswise slot. Application: Usable as face-milling, step-milling and plain milling cutter. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – – – – – – – – 170 75 – – – – – 2016 ∅ x width d1 x b1 mm Bore d2 = H7 mm Number of teeth ALU < 8% Si fz mm 2016 Order No. € 40 x 32 16 4 0.219 84.30 …0001 50 x 36 22 4 0.214 117.50 …0004 63 x 40 27 5 0.267 161.50 …0007 80 x 45 27 6 0.333 334.50 …0010 (W200) bright Shell end mill HSS Co5 DIN 1880 W DIN 138 38° bright End mills HSS-E/HSS-E PM 1.8

RkJQdWJsaXNoZXIy NTg4MTI=