FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/244 Design: Tolerance range 6g, outer hexagon without spiral point. Application: For subsequently cutting damaged threads and for thread cutting in hard to access areas. For regular metric threads according to DIN 13. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 10 – – – – – 5 5 – 18 – 12 – – – – 1831 Thread Gradient mm SW x height mm 1831 Order No. € M3 0.5 18 x 5 23.40 …0030 M4 0.7 18 x 5 22.20 …0040 M5 0.8 18 x 7 21.80 …0050 M6 1 18 x 7 21.80 …0060 M8 1.25 21 x 9 23.40 …0080 M10 1.5 27 x 11 29.20 …0100 M12 1.75 36 x 14 38.80 …0120 ​ (W174) Thread Gradient mm SW x height mm 1831 Order No. € M16 2 41 x 18 50.20 …0160 M20 2.5 41 x 18 52.60 …0200 M24 3 50 x 22 78.20 …0240 M27 3 60 x 25 122.00 …0270 M30 3.5 60 x 25 122.00 …0300 M33 3.5 60 x 25 127.50 …0320 M36 4 60 x 25 124.50 …0360 ​ (W174) bright bright Hexagonal die M HSS DIN 382 60° bright Design: Tolerance range 6g, closed, pre-slotted form, lapped, with spiral point form on both sides. Application: For metric precision threads according to DIN 13. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 10 – – – – – 5 5 – 18 – 12 – – – – 1811 10 8 5 5 4 3 5 5 – 18 – 12 – – – – 1813 10 – – – – – 5 5 – – – – – – – – 1816 Thread x gradient mm Outer Ø x height mm 1811 1813 1816 Order No. € € € M3 x 0.35 20 x 5 32.80 – 22.10 …0001 M4 x 0.35 20 x 5 32.80 – 22.10 …0003 M4 x 0.5 20 x 5 27.30 – 22.10 …0005 M5 x 0.5 20 x 5 27.30 – 22.10 …0007 M6 x 0.5 20 x 5 27.30 – 22.10 …0009 M6 x 0.75 20 x 7 22.00 36.90 15.85 …0011 M7 x 0.75 25 x 9 29.80 – 22.90 …0012 M8 x 0.5 25 x 9 38.40 – 22.90 …0013 M8 x 0.75 25 x 9 25.00 43.80 19.45 …0015 M8 x 1 25 x 9 24.00 37.70 19.45 …0017 M9 x 1 25 x 9 34.60 – 22.90 …0018 M10 x 0.75 30 x 11 33.90 – 20.90 …0019 M10 x 1 30 x 11 27.90 45.30 20.90 …0021 M10 x 1.25 30 x 11 29.90 67.90 20.90 …0023 M12 x 1 38 x 10 36.90 58.70 30.60 …0025 M12 x 1.25 38 x 10 39.90 92.30 30.60 …0027 M12 x 1.5 38 x 10 33.80 56.20 25.50 …0029 ​ (W174) (W174) (W029) Thread x gradient mm Outer Ø x height mm 1811 1813 1816 Order No. € € € M14 x 1 38 x 10 39.10 58.70 30.60 …0031 M14 x 1.25 38 x 10 45.00 – 30.60 …0033 M14 x 1.5 38 x 10 33.80 56.20 25.50 …0035 M16 x 1 45 x 14 60.80 81.30 47.60 …0037 M16 x 1.5 45 x 14 47.00 77.20 39.30 …0039 M18 x 1 45 x 14 67.50 – 47.60 …0041 M18 x 1.5 45 x 14 46.90 77.20 39.30 …0043 M20 x 1 45 x 14 60.90 – 47.60 …0045 M20 x 1.5 45 x 14 47.00 77.20 39.30 …0047 M22 x 1 55 x 16 90.10 – 63.30 …0049 M22 x 1.5 55 x 16 70.50 – 63.30 …0051 M24 x 1.5 55 x 16 70.50 108.00 63.30 …0053 M27 x 1.5 65 x 18 108.00 – 95.80 …0055 M30 x 1.5 65 x 18 105.50 – 95.80 …0057 ​ (W174) (W174) (W029) bright nitrated bright bright nitrated bright Die, metric precision thread Further dimensions available on request. MF EN 22568 60° 1811 bright HSS. 1813 nitrated HSS-E, lapped. 1816 bright HSS. 1816 bright HSS 1813 nitrated HSS-E 1811 bright HSS Dies and holding tools 1.6

RkJQdWJsaXNoZXIy NTg4MTI=