All prices quoted are non-binding recommended prices. 1/240 Design: The milling principle results in an exact thread depth, a very high surface quality in the thread, process-reliable machining of difficult to cut materials and thread production very close down to the base. Application: For drilling, countersinking and thread cutting with a single tool. For regular metric threads (both right and left thread) according to ISO DIN 13 for through holes and blind holes. Note: Solid carbide drill thread mill for additional thread types (UNC, UNF, pipe thread etc.) on request. You will find further information in the technical appendix. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – – – – – 120 96 – 200 200 – – – – – 1897 Thread Gradient mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 mm l3 mm l6 mm d3 mm dk mm Number of slots 1897 Order No. € M4 0.7 6.9 48 6 36 0.7 4.5 3.3 2 C◊ …0004 M5 0.8 8.7 54 6 36 0.8 5.5 4.2 2 C◊ …0005 M6 1 10.9 62 8 36 1 6.6 5 2 C◊ …0006 M8 1.25 13.7 74 10 40 1.25 9 6.8 2 C◊ …0008 M10 1.5 18 80 12 45 1.5 11 8.5 2 C◊ …0010 M12 1.75 20.8 90 14 45 1.5 13.5 10.2 2 C◊ …0012 M14 2 23.6 102 16 48 1.5 15.5 12 2 C◊ …0014 M16 2 26 102 18 48 1.5 17.5 14 2 C◊ …0016 (W175) TiCN Drill thread mill, DTMC-SP, for internal thread M Solid carbide DIN 6535-HA 45° 2 60° 27° 1,5xd TiCN Design: The milling principle results in an exact thread depth, a very high surface quality in the thread, process-reliable machining of difficult to cut materials and thread production very close down to the base. Application: For drilling, countersinking and thread cutting with a single tool. For regular metric threads (both right and left thread) according to ISO DIN 13 for through holes and blind holes. Note: Solid carbide drill thread mill for additional thread types (UNC, UNF, pipe thread etc.) on request. You will find further information in the technical appendix. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – – – – – 120 96 – 200 200 – – – – – 1899 Thread Gradient mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 mm l3 mm l6 mm d3 mm dk mm Number of slots 1899 Order No. € M4 0.7 9 48 6 36 0.7 4.5 3.3 2 C◊ …0004 M5 0.8 11.1 54 6 36 0.8 5.5 4.2 2 C◊ …0005 M6 1 13.9 62 8 36 1 6.6 5 2 C◊ …0006 M8 1.25 18.7 74 10 40 1.25 9 6.8 2 C◊ …0008 M10 1.5 22.5 80 12 45 1.5 11 8.5 2 C◊ …0010 M12 1.75 26.1 90 14 45 1.5 13.5 10.2 2 C◊ …0012 M14 2 31.6 102 16 48 1.5 15.5 12 2 C◊ …0014 M16 2 36 102 18 48 1.5 17.5 14 2 C◊ …0016 (W175) TiCN Drill thread mill, DTMC-SP, for internal thread M Solid carbide DIN 6535-HA 45° 2 60° 27° 2xd TiCN l 1 d1 l 2 l 3 140o dK d3 d2 45o l 6 l 1 d1 l 2 l 3 140o dK d3 d2 45o l 6 Hand taps and machine taps 1.5
RkJQdWJsaXNoZXIy NTg4MTI=