FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/233 Application: For steel casing pipe threads DIN 40430. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 10 8 6 – – – – – – 15 15 – – – – – 1777 Thread Gears per inch Thread ∅ mm Total length mm Shank ∅ mm Square shank mm Core hole ∅ mm 1777 Order No. € PG 7 20 12.5 70 9 7 11.5 37.80 …0001 PG 9 18 15.2 70 12 9 14 47.90 …0003 PG 11 18 18.6 80 14 11 17.25 48.00 …0005 PG 13.5 18 20.4 80 16 12 19 49.20 …0007 PG 16 18 22.5 80 18 14.5 21.25 78.40 …0009 PG 21 16 28.3 90 22 18 27 114.00 …0011 PG 29 16 37 100 28 22 35.5 159.00 …0013 PG 36 16 47 140 36 29 45.5 286.00 …0015 ​ (W164) bright Machine tap, short PG HSS-E DIN 40432 N 80° 2–3 C ≤ 1,5xd bright Application: M3–M10 DIN 371 with reinforced shank. M12–M16 DIN 376 with overflow shank. Synchro machine tap with special LOTUS coating. For regular metric threads according to DIN 13. Note: HSS-E PM machine tap for synchronised use with universal geometry and h6 shank tolerance. Designed with the specially developed LOTUS coating for a wide range of materials and high application speeds. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 30 20 – 8 8 – – 10 – 30 – 12 – – – – 1575 30 20 – 8 8 – – 10 – 30 – 12 – – – – 1576 Thread Gradient mm Total length mm Shank ∅ mm Square shank mm Core hole ∅ mm 1575 1576 Order No. € € M3 0.5 56 3.5 2.7 2.5 27.60 – …0030 M4 0.7 63 4.5 3.4 3.3 27.60 – …0040 M5 0.8 70 6 4.9 4.2 34.50 – …0050 M6 1 80 6 4.9 5 34.50 34.50 …0060 M8 1.25 90 8 6.2 6.8 41.80 41.80 …0080 M10 1.5 100 10 8 8.5 49.40 49.40 …0100 M12 1.75 110 9 7 10.2 65.80 – …0120 M16 2 110 12 9 14 93.90 – …0160 ​ (W168) (W168) LOTUS LOTUS Through hole machine tap, synchro M HSS-E PM 6HX UNI 60° 4–5 B ≤ 3xd 1576 LOTUS With HB shank. 1576 LOTUS DIN 371 1575 LOTUS DIN 371 DIN 376 Hand taps and machine taps 1.5

RkJQdWJsaXNoZXIy NTg4MTI=