Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/225 Application: Universal taps with a broad range of metric fine thread according to DIN 13. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 15 12 10 10 8 6 10 8 2 15 15 – – – – – 1779 20 16 13 12 10 8 15 12 2 20 20 – – – – – 1794 Thread x gradient mm Total length mm Shank ∅ mm Square shank mm Core hole ∅ mm 1779 1794 Order No. € € M4 x 0.5 63 2.8 2.1 3.5 24.50 – …0003 M5 x 0.5 70 3.5 2.7 4.5 24.50 – …0005 M6 x 0.75 80 4.5 3.4 5.2 24.50 – …0009 M8 x 1 90 6 4.9 7 21.90 35.50 …0015 M10 x 1 90 7 5.5 9 22.60 40.80 …0017 M10 x 1.25 100 7 5.5 8.8 – 43.70 …0018 M12 x 1 100 9 7 11 29.10 50.10 …0019 M12 x 1.25 100 9 7 10.8 – 52.40 …0020 M12 x 1.5 100 9 7 10.5 25.60 46.60 …0021 M14 x 1 100 11 9 13 – 60.60 …0022 M14 x 1.5 100 11 9 12.5 36.70 57.70 …0023 M16 x 1.5 100 12 9 14.5 37.80 65.30 …0025 M18 x 1.5 110 14 11 16.5 – 86.20 …0027 M20 x 1.5 125 16 12 18.5 58.30 116.50 …0029 M22 x 1.5 125 18 14.5 20.5 – 109.50 …0031 M24 x 1.5 140 18 14.5 22.5 – 126.00 …0033 M24 x 2 140 18 14.5 22 – 143.50 …0035 (W163) (W163) steam TiN Through hole machine tap, TANDEM MF DIN 374 ISO 2 6H N 60° 4–5 B ≤ 3xd 1779 steam HSS-E. 1794 TiN HSS-E PM has outstanding durability (greater edge stability, more wear-resistant) and a longer tool life. Advantages: Significantly higher process certainty through trusting in the process, up to 1/3 longer life and better surface finish for the thread. 1794 TiN HSS-E PM 1779 steam HSS-E Application: Universal taps with a broad range of metric fine thread according to DIN 13. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 12 10 8 6 5 4 10 8 – 15 15 – – – – – 1796 12 10 8 6 5 4 10 8 – 15 15 – – – – – 1797 Thread x gradient mm Total length mm Shank ∅ mm Square shank mm Core hole ∅ mm 1796 1797 Order No. € € M4 x 0.5 63 2.8 2.1 3.5 24.50 – …0003 M5 x 0.5 70 3.5 2.7 4.5 24.50 – …0005 M6 x 0.75 80 4.5 3.4 5.2 26.20 – …0009 (W163) (W163) steam TiN Blind hole machine tap, TANDEM MF DIN 374 ISO 2 6H N 60° 2–3 C 40° ≤ 3xd 1796 steam HSS-E. 1797 TiN HSS-E PM has outstanding durability (greater edge stability, more wear-resistant) and a longer tool life. Advantages: Significantly higher process certainty through trusting in the process, up to 1/3 longer life and better surface finish for the thread. 1797 TiN HSS-E PM 1796 steam HSS-E Continued on next page Hand taps and machine taps 1.5
RkJQdWJsaXNoZXIy NTg4MTI=