FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/219 Application: For metric precision threads according to DIN 13. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 11 9 7 – – – – – – 20 – – – – – – 1753 12 8 – – – – – – – – – – – – – – 1727 Thread x gradient mm Total length mm Shank ∅ mm Square shank mm Core hole ∅ mm 1753 1727 Order No. € € M3 x 0.35 56 2.2 – 2.65 20.60 54.30 …0001 M4 x 0.5 63 2.8 2.1 3.5 20.30 61.00 …0003 M5 x 0.5 70 3.5 2.7 4.5 20.00 59.40 …0005 M6 x 0.5 80 4.5 3.4 5.5 17.10 74.40 …0007 M6 x 0.75 80 4.5 3.4 5.2 17.00 73.60 …0009 M8 x 0.5 80 6 4.9 7.5 22.70 93.50 …0011 M8 x 0.75 80 6 4.9 7.2 19.75 78.50 …0013 M8 x 1 90 6 4.9 7 18.45 69.30 …0015 M10 x 0.75 90 7 5.5 9.2 27.20 109.50 …0017 M10 x 1 90 7 5.5 9 21.10 76.00 …0019 M10 x 1.25 100 7 5.5 8.8 22.80 86.00 …0021 M12 x 1 100 9 7 11 24.90 99.40 …0023 M12 x 1.25 100 9 7 10.8 26.50 84.40 …0025 ​ (W164) (W165) steam TiN Through hole machine tap MF HSS-E DIN 374 ISO 2 6H N 60° 4–5 B ≤ 3xd 1727 TiN 1753 steam Design: Extra long, the point length is approx. 21-23 threads. Application: For regular metric threads according to DIN 13. Especially for thread cutting in hard to access areas. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 10 8 6 – – – – – – 5 – – – – – – 1750 Thread Gradient mm Total length mm Shank ∅ mm Square shank mm Core hole ∅ mm 1750 Order No. € M3 0.5 70 2.2 – 2.5 23.10 …0030 M3.5 0.6 80 2.5 2.1 2.9 26.80 …0035 M4 0.7 90 2.8 2.1 3.3 23.10 …0040 M5 0.8 100 3.5 2.7 4.2 25.00 …0050 M6 1 110 4.5 3.4 5 25.90 …0060 M8 1.25 125 6 4.9 6.8 33.60 …0080 M10 1.5 140 7 5.5 8.5 37.70 …0100 M12 1.75 180 9 7 10.2 50.00 …0120 M14 2 200 11 9 12 64.20 …0140 M16 2 200 12 9 14 72.60 …0160 M18 2.5 220 14 11 15.5 140.50 …0180 M20 2.5 250 16 12 17.5 155.50 …0200 ​ (W164) bright Through hole machine tap (nut tap) M HSS-E DIN 357 ISO 2 6H N 60° 21–23 ≤ 1,5xd bright First cut length 21-23 Continued on next page Hand taps and machine taps 1.5

RkJQdWJsaXNoZXIy NTg4MTI=