FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/205 Design: M2–M10 DIN 371 with reinforced shank. M12–M30 DIN 376 with overflow shank Application: For regular metric threads according to DIN 13. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – – 10 8 6 – – – 15 15 – – – – – 1686 – – – 6 6 – – – – – – – – – – – 1637 – – – 10 8 – – – – 25 25 – – – – – 1699 25 20 15 12 10 10 25 25 3 30 30 – – – – – 1693 Thread Gradient mm Total length mm Shank ∅ mm Square shank mm Core hole ∅ mm 1686 1637 1699 1693 Order No. € € € € M2 0.4 45 2.8 2.1 1.6 10.50 – 39.70 44.20 …0020 M2.5 0.45 50 2.8 2.1 2.05 – – – 42.70 …0025 M3 0.5 56 3.5 2.7 2.5 12.25 9.95 33.90 41.30 …0030 M4 0.7 63 4.5 3.4 3.3 12.55 10.30 34.20 41.70 …0040 M5 0.8 70 6 4.9 4.2 12.55 10.35 35.50 41.70 …0050 M6 1 80 6 4.9 5 12.90 10.75 48.40 43.40 …0060 M8 1.25 90 8 6.2 6.8 14.75 12.40 52.60 51.00 …0080 M10 1.5 100 10 8 8.5 17.60 14.90 62.70 62.70 …0100 M12 1.75 110 9 7 10.2 22.40 18.80 71.00 74.40 …0120 M14 2 110 11 9 12 32.70 – 81.70 113.50 …0140 M16 2 110 12 9 14 33.50 – 80.20 113.00 …0160 M18 2.5 125 14 11 15.5 – – 108.00 180.50 …0180 M20 2.5 140 16 12 17.5 50.40 – 121.00 167.00 …0200 M24 3 160 18 14.5 21 103.50 – – 247.50 …0240 M27 3 160 20 16 24 135.50 – – – …0270 M30 3.5 180 22 18 26.5 154.50 – – 297.50 …0300 ​ (W164) (W027) (W165) (W165) bright steam TiN Sirius® Through hole machine tap, INOX M DIN 371 DIN 376 1699 TiN INOX 60° 4–5 B ≤ 3xd 1686 bright HSS-E. 1637 steam HSS-E. 1699 TiN HSS-E PM has outstanding durability (greater edge stability, more wear-resistant) and a longer tool life. Advantages: Significantly higher process certainty through trusting in the process, up to 1/3 longer life and better surface finish for the thread. 1693 Sirius® HSS-E, Sirius® coating to protection against damages to the tap: The combination of TiAIN and zirconium nitride generates a particularly tough tool surface with low friction values. Tolerance zone 6HX: Addition "X" indicates a tolerance range outside the standard - especially suitable for oversized, high-strength and abrasive materials - with a longer service life. 1693 Sirius® HSS-E 6HX HSS-E PM ISO 2 6H 1637 steam HSS-E ISO 2 6H 1686 bright HSS-E ISO 2 6H Size Set content 1793 Order No. € M3–M12 7 taps (Order No. 1686) M3; 4; 5; 6; 8; 10; 12 165.00 …1000 ​ (W164) Size Set content 1637 Order No. € M3–M12 7 taps (Order No. 1637) M3; 4; 5; 6; 8; 10; 12 92.90 …0001 ​ (W028) bright steam Through hole machine tap set, INOX 1637 0001 steam 1793 1000 bright Hand taps and machine taps 1.5

RkJQdWJsaXNoZXIy NTg4MTI=