FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/195 Application: For regular metric threads according to DIN 13. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 12 10 8 – – – – – – 17 17 – – – – – 1676 12 10 8 – – – – – – 17 17 – – – – – 1679 12 8 – – – – – – – 25 25 – – – – – 1678 12 10 – – – – – 10 – 17 – – – – – – 1622 Thread Gradient mm Total length mm Shank ∅ Square shank Core hole ∅ mm 1676 1679 1678 1622 Order No. € € € € 1676 1679 1678 1622 1676 1679 1678 1622 M1 0.25 40 2.5– – – 2.1– – – 0.75 35.30 – – – …0010 M1.2 0.25 40 2.5– – – 2.1– – – 0.95 33.90 – – – …0012 M1.4 0.3 40 2.5– 2.5– 2.1– 2.1– 1.1 26.70 – 75.20 – …0014 M1.6 0.35 40 2.5– 2.5– 2.1– 2.1– 1.25 23.80 – 61.80 – …0016 M1.8 0.35 40 2.5– 2.5– 2.1– 2.1– 1.45 23.80 – 66.80 – …0018 M2 0.4 45 2.8– 2.8– 2.1– 2.1– 1.6 13.45 – 38.00 – …0020 M2.5 0.45 50 2.8– 2.8– 2.1– 2.1– 2 13.20 – 36.40 – …0025 M3 0.5 56 3.5 2.2 3.5 3.52.7 – 2.72.7 2.5 9.80 12.15 * 31.40 7.90 …0030 M4 0.7 63 4.5 2.8 4.5 4.5 3.4 2.1 3.4 3.4 3.3 10.10 12.15 33.90 7.50 …0040 M5 0.8 70 6 3.5 6 6 4.9 2.7 4.9 4.9 4.2 10.45 12.70 34.20 7.90 …0050 M6 1 80 6 4.5 6 6 4.9 3.4 4.9 4.9 5 10.45 12.70 43.40 7.90 …0060 M8 1.25 90 8 6 8 8 6.2 4.9 6.2 6.2 6.8 12.15 15.35 48.40 9.35 …0080 M10 1.5 100 10 7 10 10 8 5.5 8 8 8.5 14.95 18.80 59.40 11.25 …0100 M12 1.75 110 – 9 9 9 – 7 7 710.2 – 21.80 67.60 14.30 …0120 M14 2 110 – 1111 – – 9 9 –12 – 30.20 97.70 – …0140 M16 2 110 – 1212 – – 9 9 –14 – 31.20 95.20 – …0160 M18 2.5 125 – 14 14 – –11 11 –15.5 – 49.00 167.00 – …0180 M20 2.5 140 – 16 16 – –12 12 –17.5 – 48.60 163.00 – …0200 M22 2.5 140 – 18 18 – – 14.5 14.5 – 19.5 – 63.50 280.50 – …0220 M24 3 160 – 18 18 – – 14.5 14.5 – 21 – 65.20 202.00 – …0240 M27 3 160 – 20 20 – –16 16 –24 – 81.10 322.50 – …0270 M30 3.5 180 – 22 22 – –18 18 –26.5 – 101.00 327.50 – …0300 ​ (W164) (W164) (W165) (W027) steam steam TiN bright Through hole machine tap * Without square. M HSS-E ISO 2 6H N 60° 4–5 B ≤ 3xd 1676 steam M1–M10 DIN 371 with reinforced shank. 1679 steam M3–M30 DIN 376 with overflow shank. 1678 TiN M1.6–M10 DIN 371 with reinforced shank. M12–M30 DIN 376 with overflow shank 1622 bright M3–M10 DIN 371 with reinforced shank. M12 DIN 376 with overflow shank. 1622 bright DIN 371 DIN 376 1678 TiN DIN 371 DIN 376 1679 steam DIN 376 1676 steam DIN 371 Hand taps and machine taps 1.5

RkJQdWJsaXNoZXIy NTg4MTI=