1/3 Tools made of high speed steel or carbide are supplied with a bright finish without extra surface treatment because of their generally good basic properties. For special applications it is recommended that tools are optimised for diverse applications by surface finishing processes, to achieve the following goals: – Extension of the tool's life – Reduced cutting force – Increased cutting speed and feed rate – Improved surface finish Titanium-nitride coating TiN Titanium-nitride is a gold-coloured protectivelayer applied by a PVD process (Physical Vapour Deposition). Higher hardness combined with a lower friction coefficient achieves a significantly longer service life and improved cutting performance. The TiN coating is primarily used for drills and thread bores. Titanium carbon-nitride coating TiCN Titanium carbon-nitride is a wear-protection layer applied by PVD being harder than TiN and having a lower friction coefficient. Tool performance is increased through greater hardness and ductility combined with improved wear. The TiCN coating is primarily used for NC drill bits, thread bores and end mills. Titanium aluminium-nitride coating TiAlN Titanium aluminium-nitride is a multi-layer ceramic coating applied using the PVD method. The resulting greater hardness and oxidation stability make this coating ideal for higher speeds and feed rates for extended tool life. The TiAlN coating is used mainly in drilling and milling machine processes, and is also recommended for dry machining. Aluminium titanium-nitride coating AlTiN Aluminium titanium nitride has a higher Al content compared to titanium aluminium nitride. This ensures an even higher oxidation resistance and has a greater layer hardness. The AlTiN coating is used mainly in drilling and milling machine processes, and is also recommended for dry machining. Zirconium nitride coating ZrN Zirconium nitride is suitable for machining nonferrous materials, and especially for aluminium alloys. This coating is not good for cold welding of aluminium. Associated with high layer hardness and oxidation resistance are advantages that increase tool service life and effective feed rate and cutting speed. High-performance carbon thin-film layer Ta-C is the most wear-resistant coating variant of diamond-like carbon coatings (DLC) and enables more cost-effective machining of demanding materials such as: • Aluminium with a silicon content of maximum 10% • Copper materials • Graphite • Fibreglass reinforced plastic (FRP) • Carbon fibre reinforced plastics (CFRP) Fire coating (TiAlN/TiN) Fire Fire is a TiAIN/TiN multi-layer coating with a gradient structure. The combined benefits of TiAlN and TiN coatings are very good wear resistance with high thermal stability, hardness and toughness. In addition to the conventional wet application, this layer can also be used for minimum quantity lubrication and dry machining. The fire coating is suitable for utilisation with all jobber drills, thread bores and end mills, as well as removable discs. Steam tempered steam Steam tempered is a form of surface machiningwhich reduces slide resistance and prevents edge build-up. Cold welding can also be avoided. Steam tempered tempering is primarily used with drills and thread bores. Nitriding nitrated Nitriding is a surface machining process that increases hardness and wear resistance. Particularly for working with highly abrasive materials such as cast iron, which nitriding is particularly suitable for. Nitriding is primarily used with drills and thread bores. Signum coating (TiAlN/SiN) Signum Thanks to the special nano-composite structure with a protective layer of TiAIN and SiN this coating, with 5500 HV is one of the hardest on the market. Particularly for hard machinability materials. High heat wear resistance combined with high diffusion resistance. Sirius® coating (TiAlN/zirconium nitride) Sirius® Sirius® coating to protection against damages to the tap: The combination of TiAIN and zirconium nitride generates a particularly tough tool surface with low friction values. Titanium aluminium-nitride S coating TiAlN-S This coating is particularly recommended for machining hardened materials (> 70 HRC). It is used mainly for end mills and is characterised by high wear resistance. Dry machining is also possible, such as HSC machining. Diamond coating Diamond This coating is particularly suitable for the machining of reinforced plastics, aluminum and copper alloys. The friction coefficient on steel is very low. LOTUS LOTUS Universal high-end multilayer PVD coating with special finishing process for high-performance machining. Their extreme wear resistance at high cutting values gives the tool a significantly longer service life. The new LOTUS coating was selected for our high-end FORMAT GTT tools for DTC milling cutters and Synchro threading tools. SUPRA SUPRA Universal high-performance PVD coating with special finishing process for HPC machining. The new SUPRA high-performance coating can be designated as a multi-grade finishing material, as it covers a wide range of applications from steel machining to the machining of stainless steels and cast iron. The new SUPRA coating was selected for our HPC drilling and threading tools FORMAT GT. AlTiN+ AlTiN+ Universal high-performance PVD coating for HPC machining. The new AlTiN+ coating is a universal coating, ideal for machining steel and cast materials. It was specially selected for our standard solid carbide end mills FORTIS. CUPRIC CUPRIC Special high-performance multilayer PVD coating with special finishing process for machining stainless and difficult-to-cut high-alloy steel materials. This new high-performance coating has been specially developed for our FORMAT GT, INOX and VG high-performance threading tools. DUO+ DUO+ Universal high-performance multilayer PVD coating with special finishing process. As a multi-grade coating material, it is suitable for a wide range of applications, from steel machining to the machining of stainless steels and cast iron. The new DUO+ high performance coating has been specially selected for our new FORMAT GT precision countersink UGT. TiN Wear- and diffusion resistance TiCN Hardness, toughness TiAlN Hot hardness, oxidation AlTiN stability Fire Hardness, toughness, wear resistance steam Lower slippage resistance nitrated Hardness, wear resistance on cast iron Signum Extreme hardness, extreme hot wear resistance Sirius® Lower slippage resistance, high wear resistance ZrN High hardness, low friction coefficient Surface finishing benefits at a glance Surface finish Colour Coating structure Thickness µm Hardness HV Coefficient of friction against steel Application temperature Surface finishing processes compared TiAlN-S Diamond Sirius® Signum ZrN nitrated steam Fire TiN TiCN TiAlN AlTiN – Improved dry machining – Optimised hard machining LOTUS SUPRA AlTiN+ CUPRIC DUO+ Surface finishing ta-C ta-C – – Golden yellow Single layer 1 – 4 2300 0,50 max. 600 °C Light brown Multilayer 1 – 4 3000 0,40 max. 400 °C Violet Multilayer 3 3200 0,55 max. 750 °C Light brown Multilayer 0,1– 3 3400 0,50 max. 900 °C Rainbow-coloured-anthracite Multilayer 6000-7500 max. 550 °C Red Multilayer 2 – 6 3300 0,60 max. 850 °C Grey Surface treatment max. 5 400 – max. 550 °C Silver-grey Surface treatment 20 1300 – max. 550 °C Red-bronze Multilayer 1 – 5 5500 0,55 max. 800 °C Pale gold Multilayer 1 – 5 3400 0,40 max. 800 °C Blue Multilayer 0,5– 4 4500 0,45 max. 1200 °C Black – 0,5– 2 5000 0,15 max. 350 °C Dark grey Multilayer 2 – 6 3300 0,15–0,20 max. 900 °C Violet black Multilayer 1 – 4 3200 0,60 max. 800 °C Violet black Multilayer 1 – 4 3200 0,55 max. 750 °C Pale-gold copper shimmering Multilayer 1 – 5 3400 0,40 max. 800 °C Light gold Multilayer 1 – 3 3400 0,50 max. 900 °C Pictograms and cutting data 1
RkJQdWJsaXNoZXIy NTg4MTI=