Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/189 Application: For pipe threads according to DIN ISO 228/1 (DIN 259). Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] C U V U U – U U V C C C – – – – 1638 C U V U U – U U V C C C – – – – 1639 C U V U U – U U V C C C – – – – 1640 Thread, inch Gears per inch Thread ∅ mm Total length mm Square shank mm Core hole ∅ mm 1638 1639 1640 Order No. € € € G 1/8 28 9.728 63 5.5 8.8 13.70 13.70 25.20 …0001 G 1/4 19 13.157 70 9 11.8 16.80 16.80 30.70 …0003 G 3/8 19 16.662 70 9 15.25 21.90 21.90 40.40 …0005 G 1/2 14 20.955 80 12 19 31.90 31.90 58.60 …0007 G 5/8 14 22.911 80 14.5 21 42.70 42.70 78.60 …0009 G 3/4 14 26.441 90 16 24.5 52.90 52.90 97.20 …0011 G 7/8 14 30.201 90 18 28.25 73.20 73.20 135.00 …0013 G 1 11 33.249 100 20 30.75 88.60 88.60 162.50 …0015 G 1.1/4 11 41.91 125 24 39.5 208.50 208.50 381.00 …0017 G 1.1/2 11 47.803 140 29 45.25 259.50 259.50 479.00 …0019 G 2 11 59.614 160 35 57 381.50 381.50 695.50 …0021 (W160) (W160) (W160) bright bright bright Hand tap G HSS DIN 5157 N 55° ≤ 3xd 1638 bright Roughing tap with point form A (6-8 threads). 1639 bright Finish tap with point form C (2-3 threads). 1640 bright 2 piece set consisting of Order No. 1638, 1639. Finish tap bright 2–3 C Roughing tap bright 6–8 A Design: 3 piece set consisting of roughing tap with point form A (6-8 threads), second tap with point form D (3.5-5 threads) and finish tap with point form C (2-3 threads). Application: For UNC unified coarse thread, ANSI B1.1. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] C U V U U – U U V C C C – – – – 1647 Thread inch Gears per inch Thread ∅ mm Total length mm Square shank mm Core hole ∅ mm 1647 Order No. € UNC No. 1 64 1.854 36 2.1 1.5 44.50 …0001 UNC No. 2 56 2.184 36 2.1 1.8 44.50 …0003 UNC No. 3 48 2.515 40 2.1 2.1 37.40 …0005 UNC No. 4 40 2.845 40 2.7 2.3 34.00 …0007 (W160) bright Hand tap set Continued on next page UNC HSS DIN 2184 N 60° 2–3 C 3,5–5 D 6–8 A ≤ 3xd Roughing tap bright Second tap Finish tap Hand taps and machine taps 1.5
RkJQdWJsaXNoZXIy NTg4MTI=