Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/177 Pin ∅ (e8) D mm Shank ∅ mm Total length mm Head length mm 1491 Order No. € 21.5 10 105 18 38.30 …2150 22 10 105 18 38.30 …2200 22.5 10 105 18 C◊ …2250 23 10 105 18 38.30 …2300 23.5 10 105 18 C◊ …2350 24 10 105 18 41.20 …2400 24.5 10 105 18 41.20 …2450 25 10 105 18 41.20 …2500 25.5 10 105 18 C◊ …2550 26 10 105 18 51.00 …2600 26.5 10 105 18 51.00 …2650 27 10 105 18 C◊ …2700 27.5 10 105 18 55.10 …2750 (W138) Pin ∅ (e8) D mm Shank ∅ mm Total length mm Head length mm 1491 Order No. € 28 10 105 18 55.10 …2800 28.5 10 105 18 C◊ …2850 29 10 105 18 C◊ …2900 29.5 10 105 18 C◊ …2950 30 10 105 18 55.10 …3000 33 10 105 18 68.60 …3300 35 10 105 18 68.60 …3500 38 10 105 18 C◊ …3800 40 10 105 18 C◊ …4000 (W138) Continued Pilot size 2 Design: Consisting of holder, countersink and pilot. The GFS piloted countersink combination system covers a wide range of bore-countersinking combinations, with the countersinks and pilots within a range of variation options of the holder. This results in the following advantages: 1. Only 4 holder sizes are required for a working range of 5 mm to 85 mm. 2. The pilot pins rotating versions in size 1 from Ø 8.5 mm and in size 2 from Ø 14.0 mm and are provided with internal cooling. 3. Pin countersinks HSS-TiN coated and with soldered carbide blades are available from stock. 4. Pin countersinks are also available with turning plate assembly from Ø 32 mm. 5. The individual elements can be combined in anyway within one size. 6. The pilot pins can be replaced without removing the countersink. Application: Suitable for DIN countersinking as well as for counterbored and countersink combinations for stepped bores or countersinks outside the standard. The holder remains in the machine when changing. The countersink and pin are clamped using a hexagon screwdriver according to DIN 911. Note: Sufficient coolant supply is essential. Countersink area mm Set content 1470 Order No. € 5– 9 Each single countersink 5; 5.5; 6; 6.5; 7; 8; 9 (Order No. 1477) 1 each pilot pin 2.4; 2.5; 2.7; 3; 3.3; 3.5; 4; 4.5 (Order No. 1479) 1 holder shank 10 mm cylinder 766.50 …0005 8.5–16.5 Each single countersink 8.5; 9.5; 10.5; 11.5; 13.5; 16.5 (order no. 1481) 1 of each pilot pin 4; 4.5; 5; 5.5; 6; 6.5; 7; 8; 8.5; 9; 9.5; 10; 10.5 (order no. 1483) 1 holder shank 10 mm cylinder 666.50 …0010 8.5–16.5 Each single countersink 8.5; 9.5; 10.5; 11.5; 13.5; 16.5 (order no. 1481) 1 of each pilot pin 4; 4.5; 5; 5.5; 6; 6.5; 7; 8; 8.5; 9; 9.5; 10; 10.5 (order no. 1483) 1 holder shank MK 1 666.50 …0015 14.5–24.5 Each single countersink 14.5; 16.5; 18.5; 20.5; 22.5; 24.5 (order no. 1485) 1 of each pilot pin 7; 7.5; 8; 8.5; 9; 9.5; 10; 10.5; 11; 11.5; 12; 13; 14; 15 (order no. 1487) 1 holder shank 12 mm cylinder 927.00 …0020 14.5–24.5 Each single countersink 14.5; 16.5; 18.5; 20.5; 22.5; 24.5 (order no. 1485) 1 of each pilot pin 7; 7.5; 8; 8.5; 9; 9.5; 10; 10.5; 11; 11.5; 12; 13; 14; 15 (order no. 1487) 1 holder shank MK 2 927.00 …0025 26–36 Each single countersink 26; 28; 30; 32; 33; 34; 36 (order no. 1489) 1 of each pilot pin 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 25 (order no. 1491) 1 holder shank MK 2 1437.00 …0030 26–36 Each single countersink 26; 28; 30; 32; 33; 34; 36 (order no. 1489) 1 of each pilot pin 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 25 (order no. 1491) 1 holder shank MK 3 1437.00 …0035 (W138) Piloted countersink combination system Continued on next page HSS Countersinks 1.4
RkJQdWJsaXNoZXIy NTg4MTI=