Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/169 Design: Axial and radial taper-ground. With straight, u-shaped flute length and flutes ground from solid. Also provided with cutting and clearance angles for the most common materials. Application: For universal chatter and burr-free drilling, countersinking and deburring work for countersunk screws DIN 963, DIN 964, DIN 965, DIN 966 and DIN 7991 in one step. Please note the large countersink range! The excellent cutting properties and easy machining process result from the cone-shaped relief grinding on the coat and angle of rake. The countersink achieves the best results with the strongest feed and lowest cutting speed. Note: Sufficient coolant supply is essential. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] C U – – – – – – – – – – – – – – 1465 U C – U – – – – – C C U – – – – 1466 Nominal-∅ mm Smallest ∅ mm Total length mm Shank ∅ mm 1465 1466 Order No. € € 6.3 1.7 44 5 13.70 17.40 …0630 8.3 2.2 48.5 6 14.25 18.15 …0830 10.4 2.7 50 6 17.00 21.60 …1040 12.4 3.2 53 8 17.95 22.80 …1240 16.5 3.7 56 10 22.90 29.20 …1650 20.5 4.2 59 10 33.10 42.20 …2050 25 5.2 61 10 44.30 56.30 …2500 31 8.1 68 12 60.90 79.10 …3100 40 10 74 15 89.70 114.00 …4000 (W134) (W134) bright TiN Countersink and deburring countersink, 120°, with cylindrical shank HSS 3 120° 1466 TiN 1465 bright Set content mm 1465 1466 Order No. € € 6.3; 10.4; 16.5; 20.5; 25 132.50 165.00 …0010 6.3; 8.3; 10.4; 12.4; 16.5; 20.5 122.00 151.00 …0005 (W134) (W134) bright TiN Countersink and deburring countersink set, 120°, with cylindrical shank 1466 TiN 1465 bright Design: HSS cutting tap bits M3; M4; M5; M6; M8; M10; M12. HSS dies M3, M4, M5, M6, M8, M10, M12. HSS die holder 25 x 9 mm. HSS tap wrench size 1.1/2". HSS-G core drills DIN 338 ∅ 2.5; 3.3; 4.2; 5.0; 6.8; 8.5; 10.2 mm HSS countersink 90°, ∅ 6.3; 8.3; 10.4; 12.4; 16.5; 20.5 mm HSS subland drill ∅ 4–12; 12–20; 6–30 mm. Thread gauge. Application: Universal assortment for metalworking for drilling and deburring as well as cutting internal and external threads. 1467 Order No. € 186.50 …0001 (W134) Metalworking starter kit HSS DIN 338 Countersinks 1.4
RkJQdWJsaXNoZXIy NTg4MTI=