Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 9/157 Design: Multi-purpose, high tolerance to oil and very resistant to water and glycol. Application: For the sealing of hard-to-reach connections between warp-resistant metal sealing and flange surfaces. ® Content ml PU 986G Order No. € 50 12 32.70 …0050 (W978) Flange sealant LOCTITE® 574 Design: Medium-strength pipe thread sealant. Application: Multi-purpose thread sealant for all normal metal threads and coarse threads up to 80 mm (3“). Ideal for fast processing at low temperatures, e.g. for outdoor maintenance work. Seals immediately at low pressure. With DVGW and WRAS approval. ® Content ml PU 9889 Order No. € 50 12 33.70 …0052 250 10 146.00 …0253 (W978) Thread sealant LOCTITE® 577 9889 0052 Design: High-strength pipe thread seal. Application: Multi-purpose thread sealant for all normal metal threads and coarse threads up to M56. Ideal for fast processing at low temperatures, e.g. for outdoor maintenance work. Seals immediately at low pressure. With DVGW and WRAS approval. ® Content ml 9891 Order No. € 50 C …0020 (W978) Thread sealant LOCTITE® 586 m Design: Coated multifilament thread - polyamide thread coated with chemically inert, legally protected paste, white, coated. Application: For sealing metal and plastic threads up to 6 inches in diameter in the domestic and industrial sectors. The thread pipe sealant can be used in contact with drinking water (hot and cold), gas, compressed air and industrial oils. Complies with the requirements of the KTW recommendation for cold and hot water, and is suitable for potable water up to +85 °C in accordance with BS 6920. Has DVGW approval,, reg. no. DV-5142 AU 0166, is tested according to EN 751-2 (class ARp) and DIN 30660. ® Content m PU 9865 Order No. € 160 48 C …0151 (W978) Thread pipe sealant LOCTITE® 55 Twineflon® Design: Thread made of 100 % PTFE. Changes its shape when joining the threads and thus forms a sealing film of the required thickness. Resistant to almost all liquids and gases, temperature resistant from –200 °C to +240 °C. In dispenser with a practical knife in the lid. Application: For easy sealing of metal and plastic threads. DVGW for gas acc. DIN EN 751-3 FRp and GRp and DIN 30660 Drinking water inspection acc. the German Drinking Water Standard recommendation from the Federal Health Office. DVGW test up to 100 bar based on DIN EN 751-3 FRp and GRp at room temperature. WRC-certification for Great Britain. ASTM F423 – tested for steam and cold water (tested by DuPont®) Content m PU 9887 Order No. € 175 12 21.30 …0010 (W999) PTFE thread pipe sealant Ulith 240 Seals 9
RkJQdWJsaXNoZXIy NTg4MTI=