FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 9/143 Design: Synthetic, completely clear, chlorine- and zinc-free, low-foam, skin-friendly and environmentally compatible. Application: For the fine processing on steel and cast surfaces. Application concentration: Normal grinding 3 to 5 %. Design 9747 Order No. € 10 l canister 137.00 B …0020 30 l canister CB …0022 ​ (W994) Grinding coolant opta Cool Grind S Premium 9747 0020 Design: Chlorine- and mineral oil-free, vegetable-based. Application: Especially for medium to heavy machining of high-alloy steels. In addition to its use on highalloy and stainless steels, it also shows excellent results when machining chrome-nickel steel, titanium and manganese-carbon steels. Excellent for drilling, tapping, reaming, grooving, countersinking, turning, milling and sawing. Also for use as a minimum quantity lubricating oil. Design PU 9655 Order No. € 300 ml spray can 12 7.50 …0005 5 l canister 1 52.00 …0045 25 l canister 1 197.00 …0050 ​ (W980) Design: Chlorine-free, with good lubricating properties, adheres to the cutting-edge. For extremely heavy machining processes where liquid metalworking oils no longer provide satisfactory results. Application: Particularly suitable for very heavy machining operations in thread cutting, drilling, milling, etc. of alloyed and unalloyed steels as well as chrome-nickel steel, titanium, manganese-carbon steels. High alloy carbon steels, chrome-nickel alloys VA, austenitic, ferritic chrome-nickel steels (stainless and heat-resistant alloys), titanium, manganese, cast steel, grey cast iron, malleable cast iron, etc. Design PU 9655 Order No. € 120 g can 10 6.60 …0025 750 g can 12 21.80 …0030 ​ (W980) Design: Chlorine and mineral oil free, washable with water. Viscosity adjustment by water possible. Application: For all metals E and NE, e.g. steel, unalloyed or alloyed, all types of cast iron, cast steel, malleable cast iron, die casting, copper and its alloys, such as cast brass, gunmetal, etc. and all chromenickel alloys. For chipping and chipless machining. For non-cutting forming operations such as rolling, deep drawing, wire drawing, tube bending, etc. thread cutting, thread chasing, tapping, centring, broaching and reaming with reamers as well as drilling and milling. Application concentration: Can be used undiluted and diluted. Slowly add the appropriate amount of water, not exceeding 20 °dH, until desired viscosity is reached, but not more than 20 % water. Example: To 10 l metalworking oil = 2 l water. Design PU 9655 Order No. € 250 ml bottle 10 7.45 …0035 ​ (W980) Cutting oil m Design: Chlorine-free, with good lubricating properties, adheres to the cutting-edge. Application: Suitable for sawing with circular saw blades, band saws and standard saw blades. For thread cutting, tapping, centring, drilling, reaming with reamers, etc. Materials such as steel, aluminium, copper, zinc and its alloys as well as cast iron can be machined very well with the wax. Design PU 9655 Order No. € 300 g applicator 10 10.00 …0020 ​ (W980) Cooling lubricant pen m High-performance cutting oil m Cutting paste m Cutting oils and cooling lubricants 9

RkJQdWJsaXNoZXIy NTg4MTI=