FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/160 Design: 90° countersink angle. Axial and radial relief ground and CBN-ground. With straight flute length and flutes ground from solid. Also provided with cutting and clearance angles for the most common materials and with userfriendly Kraftkant® handle. Application: For drilling, countersinking and deburring work by hand for countersunk screws DIN 963, DIN 964, DIN 965 and DIN 966 and DIN 7991. Nominal-∅ mm 1468 Order No. € 12.4 23.40 …1250 15 27.20 …1500 16.5 27.20 …1650 20.5 32.60 …2050 25 39.60 …2500 ​ (W134) bright Hand deburring device, 90°, with Kraftkant® handle HSS DIN 335-D 3 90° bright Design: Similar to DIN 335-C. New, innovative relief grinding process. Optimised machining geometry resulting in up to 50% longer tool life. Rotastop® shank for good torque transmission, no spinning in the drill chuck. With straight, u-shaped flute length and flutes ground from solid. Also provided with cutting and clearance angles for the most common materials. Application: Suitable for universal chatter and burr-free drilling, countersinking and deburring work for countersunk screws DIN 963, DIN 964, DIN 965 and DIN 966 in one step. Please note the large countersink range! The excellent cutting properties and easy machining process result from the cone-shaped relief grinding on the coat and angle of rake. The countersink achieves the best results with the strongest feed and lowest cutting speed. Note: Sufficient supply of coolant is essential for uncoated versions. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] C C – – – – – – – C C C – – – – 1431 C C – – – – – – – C C C – – – – 1435 C C U C C C – – – – – – – – – – 1438 C C U U U U – – – C C C – – – – 1439 Nominal-∅ mm Smallest ∅ mm Total length mm Shank ∅ mm 1431 1435 1438 1439 Order No. € € € € 6.3 1.5 45 5 13.55 19.40 20.60 16.75 …0630 8.3 2 50 6 15.20 21.70 23.00 18.20 …0830 10.4 2.5 50 6 18.20 26.00 27.80 22.50 …1040 12.4 2.8 56 8 19.65 28.10 30.00 24.30 …1240 15 3.2 60 10 22.20 31.90 33.80 27.50 …1500 16.5 3.2 60 10 23.60 33.80 36.40 29.10 …1650 19 3.5 63 10 33.70 48.20 51.10 41.40 …1900 20.5 3.5 63 10 34.40 49.40 52.30 42.60 …2050 23 3.8 67 10 41.70 59.70 63.20 51.50 …2300 25 3.8 67 10 47.60 68.10 71.50 58.70 …2500 31 4.2 71 12 64.10 91.80 96.50 79.20 …3100 ​ (W135) (W135) (W135) (W135) bright TiN TiAlN bright Countersink and deburring countersink, ADVANCED LINE®, 90°, with Rotastop® shank 3 90° Rotastop® shank 1431 bright HSS 1435 TiN HSS 1438 TiAlN HSS 1439 bright HSS-E HSS-E 1438 TiAlN HSS 1435 TiN HSS 1431 + 1439 bright HSS Countersinks 1.4

RkJQdWJsaXNoZXIy NTg4MTI=