Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/155 Design: Particularly good cutting properties thanks to the unequally split cutting edges. Reduction of feed force and chattering on the sinking surface due to reduced axial and radial forces. Application: Universal countersinks and deburring countersinks with DUO+ coating for drilling of all kinds. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 45 35 10 15 12 10 25 20 10 50 40 40 35 6 – – 1390 45 35 10 15 12 10 25 20 10 50 40 40 35 6 – – 1391 Nominal-∅ mm Smallest ∅ mm Total length mm Shank ∅ mm 1390 1391 Order No. € € 4.3 1.3 40 4 22.40 24.40 …0430 6 1.5 45 5 24.40 26.40 …0600 6.3 1.5 45 5 25.00 27.00 …0630 8 2 50 6 26.80 28.90 …0800 8.3 2 50 6 27.80 29.90 …0830 10 2.5 50 6 28.20 30.30 …1000 10.4 2.5 50 6 28.40 30.40 …1040 11.5 2.8 56 8 32.40 34.80 …1150 12.4 2.8 56 8 33.50 35.90 …1240 15 3.2 60 10 38.00 40.90 …1500 16.5 3.2 60 10 39.20 42.10 …1650 19 3.5 63 10 43.30 46.50 …1900 20.5 3.5 63 10 48.80 51.60 …2050 23 3.8 67 10 55.70 60.00 …2300 25 3.8 67 10 61.30 65.80 …2500 31 4.2 71 12 80.20 85.80 …3100 40 5 80 15 144.00 154.00 …4000 (W130) (W130) DUO+ DUO+ Countersink and deburring countersink, with uneven pitch, 90° HSS-E DIN 335-C 3 90° 1390 DUO+ With cylinder shank. 1391 DUO+ With 3 surface shank. 1391 DUO+ 1390 DUO+ Set content mm 1390 1391 Order No. € € 6.3; 10.4; 16.5; 20.5; 25 183.50 194.50 …0005 6.3; 8.3; 10.4; 12.4; 16.5; 20.5 183.50 194.50 …0010 (W130) (W130) DUO+ DUO+ Countersink and deburring countersink set, with uneven pitch, 90°. 1390 DUO+ With cylinder shank. 1391 DUO+ With 3 surface shank. 1390 DUO+ 1391 DUO+ Countersinks 1.4
RkJQdWJsaXNoZXIy NTg4MTI=