FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/153 Design: With cylinder shank. With evenly running special relief grinding in the cone coat. The good blade geometry results in a light, spiral cut. The chips are pushed up in the shank direction by the inclined hole and cannot damage the countersink. This makes the countersink round and protects the machine spindle. Application: Suitable for light and chatter-free hole deburring and countersinking. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 20 – – – – – – – – 15 15 – – – – – 1424 20 10 – 5 5 5 – – – 15 15 – – – – – 1425 Countersink area mm Total length mm Shank ∅ mm Head ∅ mm 1424 1425 Order No. € € 2– 5 45 6 10 8.60 9.85 …0100 5–10 48 8 14 10.80 12.70 …0140 10–15 65 10 21 18.75 22.00 …0210 15–20 84 12 28 34.10 40.10 …0275 20–25 102 12 35 44.50 53.60 …0350 25–30 115 15 44 59.30 69.80 …0440 30–35 127 15 48 88.60 124.50 …0480 35–40 136 15 53 123.00 167.50 …0530 40–50 166 20 60 176.00 270.00 …0640 ​ (W134) (W134) bright bright Cross hole countersink, 90° 1 90° 1424 bright Particularly suitable for long chipping materials. Sharpening is possible by simply resharpening using an abrasive pencil on the blade front. Spiral fluted with fixed pilot. 1425 bright Equally suitable for almost all materials due to the excellent cutting properties. Sharpening is possible by simply resharpening using an abrasive pencil on the blade front. 1425 bright HSS-E 1424 bright HSS Set content mm 1427 Order No. € 2–5; 5–10; 10–15; 15–20 104.50 …0001 2–5; 5–10; 10–15; 15–20 123.00 …0005 (W134) bright Cross hole countersink set, 90° 1427 0005 bright HSS-E 1427 0001 bright HSS Countersinks 1.4

RkJQdWJsaXNoZXIy NTg4MTI=