All prices quoted are non-binding recommended prices. 8/44 Note: ∅ 25.4 and 38.1 only suitable for compact discs XL-DR Ç 8/47 for edge/profile machining. ∅ mm Hardness Holding fixture PU 8245 Order No. € 25.4 Medium-hardness 1/4" 5 18.40 …0070 38.1 Medium-hardness 1/4" 5 21.70 …0075 38.1 Hard 1/4" 5 17.20 …0080 50.8 Soft 1/4" 5 23.40 …0050 50.8 Medium-hardness 1/4" 5 23.40 …0045 50.8 Hard 1/4" 5 23.40 …0025 (W812) ∅ mm Hardness Holding fixture PU 8245 Order No. € 76.2 Soft 1/4" 5 32.70 …0030 76.2 Soft M14 5 32.80 …0020 76.2 Medium-hardness 1/4" 5 32.80 …0035 76.2 Medium-hardness M14 5 32.90 …0015 76.2 Hard 1/4" 5 32.80 …0060 76.2 Hard M14 5 32.80 …0010 (W812) Backing pad for ROLOC™ abrasive discs Design: Matching for Roloc™ backing pad with 1/4“ adapter. Shank ∅ mm 8245 Order No. € 6 2.06 …0065 (W812) 361F Design: Resin-bonded aluminium oxide grain in hard Y-polyester fabric, closed scattering, waterproof. Application: Ideal for small area machining, for example for welded seam removal, surface defects improved, edges rounded, etc. Note: ROLOC™ backing pad see Order No. 8245. Steel C Grit 50 60 80 100 120 8242 20000 min-1 ∅ 50.8 mm € 1.12 1.13 1.13 1.13 1.13 50 (W812) 8243 20000 min-1 ∅ 76.2 mm € 1.59 1.48 1.48 1.34 1.34 50 (W812) Order No. …0050 …0060 …0080 …0100 …0120 PU ROLOC™ fibre disc Clamping pin for backing plate ROLOC™ 777F Design: Resin-bonded Cubitron™/aluminium oxide grain mix on hard Y-polyester fabric, half-closed scattering, waterproof. With cooling grinding aid for outstanding life and to avoid heat discolouration on the work surface. Application: Particularly suitable for machining with medium pressure. Note: ROLOC™ backing pad see Order No. 8245. Steel C INOX C Carbide C Aluminium C Grit 50 60 80 120 8242 25000 min-1 ∅ 50.8 mm € 1.80 1.71 1.62 1.50 50 (W812) 8243 20000 min-1 ∅ 76.2 mm € 2.51 2.40 2.31 2.14 50 (W812) Order No. …1050 …1060 …1080 …1120 PU ROLOC™ Cubitron™ fibre disc The combination of ROLOC™ backing pad and abrasive disc offers high flexibility and meets the requirements of a wide range of grinding applications. Due to the secure fastening of the disc by means of a simple rotary movement, there is no need for alignment at the edges and a change is quick and easy. The integrated sturdy metal threaded core with integrated 1/4" socket is designed for frequent tool changes. In this way, downtimes are considerably reduced, especially in multi-stage work processes. The different degrees of hardness of the hard rubber pad enable an optimally adjustable contact pressure. Combined with the right abrasive, almost all areas of application are covered, from deburring to grinding and finishing. Smaller backing pad diameters (25.4 mm and 38.1 mm) are particularly suitable for edge and profile machining. For quick and safe selection of the right grain all ROLOC™ abrasive discs are colour-coded. The backing pads are compatible with disc grinders, angle grinders, rotary grinders and drills by means of a clamping pin. ROLOC™ system 8
RkJQdWJsaXNoZXIy NTg4MTI=