Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 8/39 Z SGP CURVE STEELOX Design: With zirconia alumina layers (Z), resin-bonded, high strength with fibreglass discs attached. High stock removal rate and outstanding service life Flap grinding disc is covered with layers on both the grinding side and rear and around the radius. Manufactured without details of content for iron, sulphur or chlorine filling agents. With X-LOCK holder for fast and convenient tool change. Application: Suitable for fillet weld machining, weld seam machining and for chamfering and deburring. Steel C INOX V Grit 40 40 For fillet seam width mm 5 8 8947 12200 min-1 ∅ 125 mm € 12.85 13.45 (W848) Order No. …1040 …2040 Flap disc X-LOCK, zirconia alumina CURVE Fe + Cl + S ≤ 0,1 % POLIVLIES PVL Design: Aluminium oxide layers (A), with fibre-reinforced resin bond for long life and high grinding performance. With X-LOCK holder for fast and convenient tool change. Application: For universal work, from rough grinding to fine sanding. INOX C Grit 100 180 240 8961 13300 min-1 ∅ 115 mm € 12.90 12.00 11.45 (W849) 8963 12200 min-1 ∅ 125 mm € 15.90 14.85 14.30 (W849) Order No. …0100 …0180 …0240 Flap disc X-LOCK, aluminium oxide 8961 ∅ 115 mm, radial. 8963 ∅ 125 mm, radial. Z SG POWER STEELOX Design: With zirconia alumina layers (Z), resin-bonded, high strength with curved fibreglass discs attached. Aggressive stock removal performance and outstanding service life Manufactured without details of content for iron, sulphur or chlorine filling agents. With X-LOCK holder for fast and convenient tool change. Application: Suitable for weld seam machining and for chamfering and deburring. Also suitable for surface grinding on steel. Steel C INOX C Grit 40 60 80 8939 12200 min-1 ∅ 125 mm € 7.20 7.20 7.20 (W848) Order No. …0040 …0060 …0080 Flap grinding disc X-LOCK, aluminium oxide Fe + Cl + S ≤ 0,1 % X-LOCK System 8
RkJQdWJsaXNoZXIy NTg4MTI=