Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 8/35 ZK713K Design: Resin-bonded zirconia alumina grain (ZA) on fabric, electrostatically scattered. Excellent grit friction, long life, minimal pressure and good flexibility. Thanks to the active substance in the surface-binding it causes hardly any discolouration and gives optimum cutting performance. Backed with durable Velcro Application: Special product for treating tough machinable and alloyed steel, nonferrous metals and titanium, for all angle grinders with backing pads and max. 32 m/s peripheral speed. Ideal for working with containers, cast parts, body parts etc. Note: Velcro backing discs see Order No. 8259. Steel C Grit 40 60 80 8769 ∅ 125 mm € 100 pieces 96.40 82.00 77.20 50 (W837) Order No. …0040 …0060 …0080 PU Velcro abrasive disc, zirconia alumina Design: Resin-bonded nylon velour with aluminium oxide grain (A), evenly distributed, waterproof. The uniform, open structure adapts optimally to the workpiece, prevents premature clogging, reduces heat generation and thus enables up to 50 % longer tool life compared to conventional discs. Free from corrosion-producing components. The inner core is pre-punched and can be removed to allow mounting on an adhesive support plate with centring (standard bore 22.23 mm). This makes it possible to reduce vibrations by up to 50 %. Application: Ideal for removing discolouration, layers of paint and rust. To improve mildly damaged surfaces. Steel C INOX C Metal, high temperature resistance V Plastic/FRP V Fineness grade Coarse medium Fine Colour brown red blue 8777 ∅ 115 mm € 3.32 3.17 3.17 10 (W841) 8779 ∅ 125 mm € 3.84 3.65 3.65 10 (W841) Order No. …0005 …0010 …0015 PU Velcro-fleece disc with centring KV701K Design: Resin-bonded fleece with aluminium oxide grain (A), on flexible fabric. Excellent grit friction, long life, minimal pressure and good flexibility. Backed with durable Velcro Application: For processing alloyed and non-alloyed steel as well as nonferrous metals and wood, for all angle grinders with backing pads and max. 32 m/s peripheral speed. Ideal for removing rust and old paint, for finishing surfaces as well as working with wood. Note: Velcro backing discs see Order No. 8259. Steel C INOX C Aluminium V Non-ferrous metal C Wood V Colour/paint V Grit 100 100 180 180 280 8770 ∅ 115 mm € 100 pieces 443.00 – – 402.00 384.50 10 (W836) 8771 ∅ 125 mm € 100 pieces – 634.50 – 537.50 479.00 10 (W836) 8772 ∅ 150 mm € 100 pieces 693.00 – 586.00 – 586.00 10 (W836) Order No. …0100 …0101 …0180 …0181 …0280 PU Velcro-fleece abrasive disc, aluminium oxide Design: Made of flexible rubber, complete with M14-thread. Application: For mounting all Velcro abrasive discs on all standard angle grinders at max. 32 m/s peripheral speed. ∅ mm 115 125 150 8259 € 9.35 11.05 13.00 (W836) Order No. …1115 …1125 …1150 Velcro backing pad Velcro discs 8
RkJQdWJsaXNoZXIy NTg4MTI=