All prices quoted are non-binding recommended prices. 8/32 982C Design: Fully synthetic resin-bonded precision ceramic grit on glass fabric backing, evenly and semi-loose. The individual grains of the ceramic Cubitron™ II abrasives are small, precisely-shaped triangles, perpendicular in arrangement, and uniform in size. They are uniformly distributed but randomly spread, so that each triangle grain can form two chips. Tough, cool grinding with high removal rate, lasts up to 3 times longer and over 30% faster removal. Application: In all metal-working industries, where high removal rates combined with very good surface finishes need to be achieved. Ideal for surface grinding, cast iron work, flame-torch work on engineering steel and non-ferrous metals. Note: For backing discs with grain sizes 36+ and 60+ see Order No. 8239, for grain size 80+ see Order No. 8240. Steel C Aluminium C Non-ferrous metal C Grit 36+ 60+ 80+ 8218 13200 min-1 ∅ 115 mm € 3.11 2.75 2.66 25 (W812) 8219 12000 min-1 ∅ 125 mm € 3.30 3.05 2.90 25 (W812) 8221 8500 min-1 ∅ 180 mm € 6.40 5.85 5.60 25 (W812) Order No. …0036 …0060 …0080 PU Fibre disc Cubitron™ II for steel machining 982CX Pro Design: Fully synthetic resin-bonded precision ceramic grit on glass fabric backing, evenly and semi-loose. The individual grains of the ceramic Cubitron™ II abrasives are small, precisely-shaped triangles, perpendicular in arrangement, and uniform in size. They are uniformly distributed but randomly spread, so that each triangle grain can form two chips. Tough, cool grinding with high removal rate, lasts up to 3 times longer. Up to 33 % faster removal than Cubitron™ II fibre grinding wheel 982C. Application: In all metal-working industries, where high removal rates combined with very good surface finishes need to be achieved. Ideal for surface grinding, cast iron work, flame-torch work on engineering steel and non-ferrous metals. Note: For backing discs with grain sizes 36+ and 60+ see Order No. 8239, for grain size 80+ see Order No. 8240. Steel C Aluminium C Non-ferrous metal C Grit 36+ 8217 13200 min-1 ∅ 115 mm € 3.11 25 (W812) 8220 12000 min-1 ∅ 125 mm € 3.30 25 (W812) 8222 8500 min-1 ∅ 180 mm € 6.40 25 (W812) Order No. …0036 PU Fibre disc Cubitron™ II for steel machining m 987C Design: Fully synthetic resin-bonded precision ceramic grit on glass fabric backing, evenly and semi-loose. The individual grains of the ceramic Cubitron™ II abrasives are small, precisely-shaped triangles, perpendicular in arrangement, and uniform in size. They are uniformly distributed but randomly spread, so that each triangle grain can form two chips. Tough grinding with highest removal rate, lasts up to 3 times longer and 40% faster removal. Grinding-activated coating prevents clogging and makes for cooler grinding. Application: In all metal-processing industries, where high removal rates combined with very good surface finishes need to be achieved. For use with backing bad on all angle grinders. Ideal for surface grinding, pre- and postwelding work on stainless steel, aluminium, titanium and nickel alloys. Note: For backing discs with grain sizes 36+ see Order No. 8239, for grain size 60+ and 80+ see Order No. 8240. Steel C INOX C Non-ferrous metal C Grit 36+ 60+ 80+ 8224 13200 min-1 ∅ 115 mm € 3.31 2.92 2.78 25 (W812) 8225 12000 min-1 ∅ 125 mm € 3.47 3.16 2.97 25 (W812) 8231 8500 min-1 ∅ 180 mm € 6.50 5.90 5.75 25 (W812) Order No. …0036 …0060 …0080 PU Fibre disc Cubitron™ II for stainless steel machining Fibre grinding wheels 8
RkJQdWJsaXNoZXIy NTg4MTI=