FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 8/29 Fibre disc, ceramic grit with zirconia alumina admixture XF850 Design: Fully synthetic resin-bonded, self-sharpening ceramic grain (CER) with zirconia alumina (ZA) admixture. Grinding-activated additives make cool sanding possible, thereby significantly increasing performance. This also ensures extended service life and reduces discolouration of workpiece surfaces. Abrasive on dimensionally stable fibre glass backing, smooth and slightly loose. With excellent grit friction, extra-long life, low to medium pressure and very good flexibility. With centre hole (standard bore 22.23 mm) and cross slots. Application: Ideal for machining hard surfaces. For all angle grinders with backing pads of max. 80 m/s peripheral speed. Note: Rubber backing pads can be found on Ç 8/31. Steel C INOX C Aluminium C Non-ferrous metal V Grit 36 40 60 80 ​ 8651 ∅ 125 mm € 100 pieces 170.00 144.50 113.50 103.00 50 (W846) Order No. …0036 …0040 …0060 …0080 PU KF808 Design: Resin-bonded aluminium oxide grain (A) on very sturdy fibre glass backing, even and slightly loose. Excellent grit friction, long life, minimal pressure and good flexibility. An active additive in the coating slows disc-clogging during use on soft metals (aluminium, stainless steel, etc.). In addition, the coating acts as a coolant during grinding. With centre hole (standard bore 22.23 mm) and cross slots. Application: For all angle grinders with backing pads of max. 80 m/s peripheral speed. Note: Rubber backing pads can be found on Ç 8/31. Steel V INOX C Aluminium C Non-ferrous metal V Super alloy V Grit 36 50 60 80 100 120 ​ 8763 ∅ 115 mm € 100 pieces 60.30 49.80 48.60 46.50 46.50 46.50 50 (W836) 8764 ∅ 125 mm € 100 pieces 77.30 70.10 66.40 62.60 62.60 62.60 50 (W836) Order No. …0036 …0050 …0060 …0080 …0100 …0120 PU Fibre disc, aluminium oxide, for stainless steel and aluminium work ZF714 Design: Resin bonded zirconia alumina grain (ZA) on robust and flexible fabric, evenly and slightly loose. Excellent grit friction, long life, minimal pressure and good flexibility. Self-sharpening and cooled grinding, thus optimum machining performance. With centre hole (standard bore 22.23 mm) and cross slots. Application: For all angle grinders with backing pads of max. 80 m/s peripheral speed. Note: Rubber backing pads can be found on Ç 8/31. Steel C INOX C Non-ferrous metal V Grit 24 36 60 80 120 ​ 8765 ∅ 115 mm € 100 pieces 97.70 87.10 58.20 52.90 52.90 50 (W836) 8766 ∅ 125 mm € 100 pieces 108.50 96.70 64.50 58.70 58.70 50 (W836) Order No. …0024 …0036 …0060 …0080 …0120 PU Fibre disc, aluminium oxide KF787 Design: Resin-bonded aluminium oxide grain (A) on very sturdy fibre glass backing, even and slightly loose. Excellent grit friction, long life, minimal pressure and good flexibility. With centre hole (standard bore 22.23 mm) and cross slots. Application: For all angle grinders with backing pads of max. 80 m/s peripheral speed. Note: Rubber backing pads can be found on Ç 8/31. Steel C INOX C Non-ferrous metal C Colour/paint C Grit 16 24 36 40 50 60 80 100 120 ​ 8760 ∅ 115 mm € 100 pieces 62.00 58.10 47.70 44.20 43.00 41.80 40.10 40.10 40.10 50 (W836) 8761 ∅ 125 mm € 100 pieces 70.00 65.20 58.80 54.00 53.30 49.70 46.80 46.80 46.80 50 (W836) 8762 ∅ 180 mm € 100 pieces 145.00 125.00 118.00 109.00 – 93.80 94.80 90.70 90.70 50 (W836) Order No. …0016 …0024 …0036 …0040 …0050 …0060 …0080 …0100 …0120 PU Fibre disc, aluminium oxide Fibre grinding wheels 8

RkJQdWJsaXNoZXIy NTg4MTI=