FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 8/15 Design: Aluminium oxide (A 46, A 60), hard, with fibre-reinforced resin bond for long life and cutting performance. Made without iron, sulphur and chloride fillers. Standard bore 22.23 mm. Application: For cutting thin sheet metal as well as thin-walled stainless steel sections and tubes. The thin cutting discs (1.0 mm thickness) are very easy to use and save energy with low-burr formation and low material consumption, the thicknesses 1.6 to 1.9 mm for universal cutting tasks. Note: For more safety and higher lateral stability working with detachable disks from 180 mm diameter we recommend using a spanner flange, see 8110 0010 Ç 8/18. Steel C INOX C Non-ferrous metal V ∅ x thickness mm Plate shape max. rpm min-1 PU 8085 8062 Order No. ​ A 60 TZ SPECIAL € € 115 x 1.0 Straight 13300 25 1.50 1.81 …0115 115 x 1.6 Straight 13300 25 1.54 – …0116 125 x 1.0 Straight 12200 25 1.65 2.06 …0125 125 x 1.6 Straight 12200 25 1.70 – …0126 180 x 1.6 Straight 8500 25 2.64 – …0180 230 x 1.9 Straight 6600 25 3.63 3.90 * …0230 ​ (W830) (W850) Cutting disc for stainless steel machining * A 46 TZ SPECIAL. Fe + Cl + S ≤ 0,1 % 8062 8085 A 960 TZ SPEZIAL Design: Self-sharpening aluminium oxide (A 46), hard, with fibre-reinforced synthetic resin bond for a long tool life and long, consistent cutting performance. Cool grinding for clean grinding results even on soft metals. Particularly low vibration. Made without iron, sulphur and chloride fillers. Standard bore 22.23 mm. Application: For cutting thin sheet metal as well as thin-walled stainless steel sections and tubes. The thin cutting discs (1.0 mm thickness) are very easy to use and save energy with low-burr formation and low material consumption. ​ Steel C INOX C ∅ x thickness mm Plate shape max. rpm min-1 PU 8067 Order No. € 115 x 1.0 Straight 13300 25 2.09 …0115 125 x 1.0 Straight 12200 25 2.40 …0125 ​ (W850) Cutting disc for stainless steel machining m Fe + Cl + S ≤ 0,1 % Important note for working with stainless steel For working with stainless steel generally only iron and sulphur-free tools are recommended. A tool should never be used for stainless steel after processing ordinary steel. Residue from ordinary steel can be left on the tool. These residues destroy any stainless steel alloy and lead to the formation of rust on the machined stainless steel. Even sparks from machining ordinary steel can damage stainless steel alloys. Cutting discs 8

RkJQdWJsaXNoZXIy NTg4MTI=