Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 8/11 CC-GRIND STRONG SG STEEL Design: Resin-bonded aluminium oxide grain (Z) with grinding carry plate and three-layer abrasive grit, even and slightly loose. The innovative high-strength layer structure of the fibre supporting plate ensures rugged and safe use as with a rough abrasive disc. Rapid progress thanks to very strong grinding material. Noise and vibration are reduced by 50%, dust by 70 %. Application: Suitable for surface grinding, weld seam machining and for chamfering and deburring. Note: Three times the surface life compared to CC-GRIND-SOLID SG STEEL thanks to the grinding carry plate and three-layer abrasive grit, which can be used one after the other. Steel C ∅ mm max. rpm min-1 PU 8020 Order No. € 115 13300 10 8.10 …0115 125 12200 10 9.05 …0125 (W840) Abrasive disc for steel and scale work Design: Triangular VICTOGRAIN point grit The point grit disc on the equally shaped and sized triangle meet the workpiece at the perfect angle; thus each point grit only needs a small amount of energy to penetrate into the workpiece. The point grits are fixed onto the carrier with one side of the triangle; they are firmly embedded and, together with the slim design, offer an extremely large clamping area. The very small crystals within the triangle provide very sharp blades and only a minimum of the point grip breaks off. Noise and vibration are reduced by 50%, dust by 80%. Application: Suitable for surface grinding, weld seam machining and for chamfering and deburring. Ultimate strength for the fastest work progress. Note: Not suitable for peripheral grinding. Note: Only for use with spanner flange set Order No. 8024 1000 and Order No. 8024 1005. 8163 8167 Steel C INOX C ∅ mm max. rpm min-1 PU 8163 8167 Order No. € € 115 13300 10 7.15 7.90 …0115 125 12200 10 7.95 8.80 …0125 180 8500 10 14.60 16.05 …0180 (W840) (W840) Abrasive disc CC-GRIND SOLID SGP 8163 CC-GRIND SOLID SGP STEEL 8167 CC-GRIND SOLID SGP INOX Manufactured without details of content for iron, sulphur or chlorine filling agents. 8167 Fe + Cl + S ≤ 0,1 % 8163 Rough grinding discs 8
RkJQdWJsaXNoZXIy NTg4MTI=