FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/134 Design: With long, conical point (approx. 1/3 of cutting length). The uneven tooth pitch ensure chatter-free and accurate drilling. With cylinder shank as well as square drive. Application: Suited for single production or repair work. Not suitable for machining blind-holes due to the long, conical point geometry. Also suitable for holes with interrupted cut. Hand reamer Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] C U V V V – U U V U U U – – – – 1500 Nominal ∅ d1 mm Cutting length l4 mm Total length l1 mm Square SW mm 1500 Order No. € 2 25 50 1.6 18.85 …0200 2.5 29 58 2.1 19.15 …0250 3 31 62 2.1 18.85 …0300 3.5 35 71 2.7 22.10 …0350 4 38 76 3 17.10 …0400 4.5 41 81 3.4 20.50 …0450 5 44 87 3.8 19.90 …0500 5.5 47 93 4.3 21.90 …0550 6 47 93 4.3 19.55 …0600 6.5 50 100 4.9 22.40 …0650 7 54 107 5.5 21.50 …0700 7.5 54 107 5.5 24.50 …0750 8 58 115 6.2 22.10 …0800 8.5 58 115 6.2 26.60 …0850 9 62 124 7 25.20 …0900 9.5 62 124 7 27.20 …0950 10 66 133 8 26.20 …1000 11 71 142 9 29.20 …1100 12 76 152 10 31.40 …1200 13 76 152 10 46.20 …1300 14 81 163 11 50.20 …1400 15 81 163 11 53.00 …1500 16 87 175 12 55.10 …1600 17 87 175 12 58.60 …1700 18 93 188 14.5 64.60 …1800 19 93 188 14.5 69.40 …1900 20 100 201 16 68.00 …2000 22 107 215 18 78.90 …2200 24 115 231 20 91.10 …2400 25 115 231 20 93.20 …2500 26 115 231 20 99.30 …2600 28 124 247 22 127.50 …2800 30 124 247 22 134.00 …3000 32 133 265 24 148.50 …3200 34 142 284 26 200.00 …3400 35 142 284 29 201.50 …3500 36 142 284 24 211.00 …3600 38 152 305 29 255.50 …3800 40 152 305 32 265.00 …4000 ​ (W140) bright Further dimensions or straight fluted available on request. HSS DIN 206-B H7 ≈ 7° bright Reamers 1.3

RkJQdWJsaXNoZXIy NTg4MTI=